3M Clean Sanding Interface Disc Pad 28323 7100009701

The 3M (TM) Interface Pad is our 1.3 cm thick medium density foam pad that provides additional surface conformability when used with a 3M (TM) Hookit (TM) backing pad on a 3M (TM) Random Orbital Sander. This added conformability helps when sanding critical surfaces with fine grit abrasives - after completing the leveling and refining sanding steps, but before the final finishing steps. Adaptability that protects your tools and your work surface The 3M (TM) Interface Pad is placed between the backing pad and the sanding disc or sheet. It provides additional adaptability when sanding curves and profiles and helps users even when fillet sanding. The right choice for machine sanding - no alignment required Some of these interface pads are designed to work with our 3M machine sanding system, maximizing dust extraction. They must be used with a 3M (TM) machine sanding backing pad on a tool with integrated or centralized dust extraction. Our 3M (TM) dust management system for machine sanding removes dust from the work surface better than products with 5 or 6 holes. This significantly increases tool life and maximizes removal rate. Optimized with a sanding tool with integrated extraction and a filter bag for machine sanding (sold separately) or with a central extraction system, the machine sanding system extracts dust from the air around the tool and directly from the work surface. This reduces clogging of the wheel and extends the service life of the abrasive. In addition, working conditions are improved by reducing dust particles in the air. The 3M (TM) Interface Pad for machine sanding is available for use with 12.7 cm machine sanding discs and discs or machine sanding discs and strips. Both feature a unique multi-hole perforation designed to maximize dust extraction. This extends the life of the abrasive, improves results and keeps the air clean. When using 3M (TM) Interface Pads for machine sanding, align the holes in each interface pad with the holes on the backing pad to maximize dust extraction. The unique multi-hole design of 3M (TM) machine sanding discs does not require alignment on the backing pad or interface pad, saving you additional time and effort.