3M Cushion-Mount (TM) Plus plate mounting tape E1120 Brown 7000042361

The 3M (TM) Cushion-Mount (TM) Plus plate mounting tape E1120 is used for mounting your photopolymer plates on printing cylinders. Our 0.51 mm thick, beige double-sided plate mounting tape has micro-channels and enables easy removal of the tape after the printing process. It is used in halftone printing. 3M (TM) Cushion-Mount (TM) Plus plate mounting tape E1120 is used for easy mounting of flexographic printing plates on cylinders or sleeves. It enables high-quality printing results for halftone motifs. Our Easy Mount protective film creates micro-channels on both sides of the adhesive. The diamond-shaped grid pattern creates a continuous and permanent network of micro-channels in the adhesive film, which allows air to escape between the adhesive tape and cylinder/sleeve and between the adhesive tape and cliché. The adhesive on the side with the protective film (facing the cliché) was specially developed for photopolymer plates. It has a high holding force during the printing process and enables the printing plate to be removed easily afterwards. The adhesive on the side (facing the cylinder) without protective film has been specially developed for printing cylinders/sleeves. It ensures that the adhesive tape is easy to apply during assembly and can be removed cleanly during disassembly.