3M Cushion-Mount (TM) plate mounting tape E1715H Teal 457 mm x 4.5 m 7000049182

Use 3M (TM) Cushion-Mount (TM) Plus plate mounting tape E1715H to mount your photopolymer plates on printing cylinders. Our 0.38 mm thick, turquoise double-sided plate mounting tape with high adhesion on the plate side has micro-channels that prevent air bubbles from forming. It is used in combination printing with predominantly full-tone elements. 3M (TM) Cushion-Mount (TM) Plus plate mounting tape E1715H has a stronger adhesive on the plate side and is used for easy mounting of flexographic printing plates on cylinders or sleeves. It enables high-quality printing results when the solid areas slightly predominate in a combination of solid and halftone elements. Our Easy Mount protective film creates micro-channels on both sides of the adhesive. The diamond-shaped grid pattern creates a continuous and permanent network of microchannels in the adhesive film, which allows air to escape between the adhesive tape and cylinder/sleeve and between the adhesive tape and cliché. The adhesive on the side with the protective film (facing the cliché) was specially developed for photopolymer plates. It has a high holding force during the printing process and enables the printing plate to be removed easily afterwards. The adhesive on the side (facing the cylinder) without protective film has been specially developed for printing cylinders/sleeves. It ensures that the adhesive tape is easy to apply during assembly and can be removed cleanly during disassembly.