3M Cushion-Mount (TM) plate mounting tape violet 457 mm x 4.57 m 7000115852

The 3M (TM) Cushion-Mount (TM) Plus plate mounting tape E1520 is used for mounting your photopolymer plates on printing cylinders. Our 0.51 mm thick, white double-sided plate mounting tape has micro-channels and allows easy removal of the tape after the printing process. It is used in high-speed combination printing. 3M (TM) Cushion-Mount (TM) Plus plate mounting tape E1520 is used for easy mounting of flexographic printing plates on cylinders or sleeves. It enables high quality in high-speed combination printing. Our Easy Mount protective film creates micro-channels on both sides of the adhesive. The diamond-shaped grid pattern creates a continuous and permanent network of micro-channels in the adhesive film, which allows air to escape between the adhesive tape and cylinder/sleeve and between the adhesive tape and cliché. The adhesive on the side with the protective film (facing the cliché) was specially developed for photopolymer plates. It has a high holding force during the printing process and enables the printing plate to be removed easily afterwards. The adhesive on the side (facing the cylinder) without protective film has been specially developed for printing cylinders/sleeves. It ensures that the adhesive tape is easy to apply during assembly and can be removed cleanly during disassembly.