ATORN Acute mitre square, 45°, 150x100 mm, sim. to DIN 875, f 90° steel squares

Name: ATORN Acute mitre square, 45°, 150x100 mm, sim. to DIN 875, f 90° steel squares
Brand: ATORN
SKU: 38176150

Brand: ATORN

Material: Unhardened steel

Art.-no. 38176150

Manufacturer article no. 31050108

EAN 4050293187229

All versions

Similar products

Individual prices for customers after login

ATORN Acute mitre square, 45°, 150x100 mm, sim. to DIN 875, f 90° steel squares

Art.-no. 38176150

Quantity

Price per

Piece

You need more information or have not found your desired product?

Application

For marking off and inspecting 45° angles

Execution

With stop
Test surfaces precisely ground and lapped, side surfaces ground
Made from special steel

Product information

HAHN+KOLB Catalogue

Certificates/ Documents

Brand	ATORN
EAN	4050293187229
Manufacturer Part Number	31050108
Minimum order quantity	1
Limb length x limb length 2	150 x 100 mm
Angle	45 Degree
Type	Acute mitre square
Material	Unhardened steel
Cross-section length x cross-section width	20 x 5 mm
Gross Weight	0.400 kg

Additional accessory:

Product

Description

Quantity

Price per

Price

MELUTEC Labelling/lettering/engraving up to 16 chars to be specified in shopping basket

Labelling/lettering/engraving up to 16 characters (more than 16 characters available upon request)

MELUTEC

Art.-no. 30000887

x 1 Piece

MELUTEC DAkkS calibration for centring squares 100-600 mm

Calibration group W centring squares

MELUTEC

Art.-no. 30000187

x 1 Piece

MELUTEC Factory calibration for centring squares 100-600 mm

Calibration group W centring squares

MELUTEC

Art.-no. 30000427

x 1 Piece

MELUTEC DAkkS without sticker for centring squares 100-600 mm

Calibration group W centring squares

MELUTEC

Art.-no. 30000619

x 1 Piece

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.