ATORN Bevel square 45°, 120 x 80 mm, similar to DIN 875 for 90° steel squares

Name: ATORN Bevel square 45°, 120 x 80 mm, similar to DIN 875 for 90° steel squares
Brand: ATORN
SKU: 38176120

Brand: ATORN

Minimum order quantity: 1

Material: Unhardened steel

Art.-no. 38176120

Manufacturer article no. 31050106

EAN 4050293187212

All versions

Similar products

Individual prices for customers after login

ATORN Bevel square 45°, 120 x 80 mm, similar to DIN 875 for 90° steel squares

Art.-no. 38176120

Quantity

Price per

Piece

You need more information or have not found your desired product?

Application

For marking off and checking 45° angles

Execution

With stop
Precisely ground and lapped check surfaces, polished side surfaces
Made of special steel

Product information

HAHN+KOLB Catalogue

Certificates/ Documents

Brand	ATORN
EAN	4050293187212
Manufacturer Part Number	31050106
Minimum order quantity	1
Limb length x limb length 2	120 x 80 mm
Angle	45 Degree
Type	Try square
Material	Unhardened steel
Cross-section length x cross-section width	20 x 5 mm
Gross Weight	0.226 kg

Additional accessory:

Product

Description

Quantity

Price per

Price

MELUTEC Labelling/lettering/engraving up to 16 chars to be specified in shopping basket

Labelling/lettering/engraving up to 16 characters (more than 16 characters available upon request)

MELUTEC

Art.-no. 30000887

x 1 Piece

MELUTEC DAkkS calibration for centring squares 100-600 mm

Calibration group W centring squares

MELUTEC

Art.-no. 30000187

x 1 Piece

MELUTEC Factory calibration for centring squares 100-600 mm

Calibration group W centring squares

MELUTEC

Art.-no. 30000427

x 1 Piece

MELUTEC DAkkS without sticker for centring squares 100-600 mm

Calibration group W centring squares

MELUTEC

Art.-no. 30000619

x 1 Piece

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.