ATORN SC HPC POWER end mill stainless steel T4 16x32x44x92 mm HB type VA long
Brand: ATORN
Surface: ULTRA M
Length: 92 mm
Art.-no. 16855752
Manufacturer article no. 11240068
EAN 4066107126117
Application
HPC end mill for machining corrosion- and acid-resistant steels and titanium- and nickel-based alloys, optimal application in trochoidal milling and in edge, corner and groove machining.
Execution
- SC ultra-fine grain
- ULTRA M high-performance coating
- Centre cutting capability
- unequal helix angle: 41°/44°
- unequal cutting edge pitch
- optimised cutting edge design
- with neck reduction
- Cutting edge with edge preparation
Advantage
- Increased material removal rate
- high process reliability owing to robust cutting edges
- higher feed rates and cutting depths possible
- reduced vibration
- ideal for static and dynamic trochoidal milling
 | |
Brand | ATORN |
EAN | 4066107126117 |
Manufacturer Part Number | 11240068 |
Minimum order quantity | 1 |
Cutting material | SC |
Surface | ULTRA M |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 41°, 44° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 16 mm |
Cutting edge length | 32 mm |
Clearance length | 44 mm |
Length | 92 mm |
Clearance diameter | 15 mm |
Shank diameter | 16 mm |
fz stainless steel | 0.11 mm |
Harmonized System Code | 82077010 |
Gross Weight | 0.246 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | - | - | |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | - | - | |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | - | - | |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | - | - | |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | - | - | |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | - | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 100-110 | 0.03 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | - | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | - | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | - | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 100-110 | 0.02 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | - | - | |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 300-330 | 0.05 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | - | - | |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 220-240 | 0.04 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | - | - | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 250-280 | 0.05 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | - | - | ||
| 3.08 Duroplast | Bakelit, Melamin | <150 | - | - | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | - | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 80-90 | 0.03 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 40-50 | 0.03 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 30-40 | 0.02 | ⚫ |
Last viewed
MAKITA O-ring set 1/2 inch 3 pieces for 1/2 inch SW17 B-54558
SATA plastic nut for WA 0/314, 0/324, 0/344 + 0/400 series 52779
ATORN Thread cutting insert 22IRZ4UN HC5630
FEIN Spring 31324000463
ATORN Thread cutting insert holder with internal cooling SER1616H16B
ELTEN RIWEMO XXP GTX Low ESD S3S WR CI safety shoe, size 44 728011-44
KS TOOLS Screw 550.1710-R019P
ATORN Collet ER32 UP dia. 4.5 mm sealed concentricity 2 µm
CLAX Folding box black, 46 litres
KS TOOLS Brake disc calipers