ATORN SC HPC POWER end mill steel T4 12x12x26x73 mm HA type N short
Brand: ATORN
Surface: ULTRA
Length: 73 mm
Art.-no. 16854836
Manufacturer article no. 11240027
EAN 4066107125707
Application
HPC end mill for machining steel and cast iron. Low-vibration, multi-functional and high-performance tool for roughing and finishing up to 2xD.
Execution
- SC ultra-fine grain
- ULTRA high-performance coating
- Centre cutting
- unequal helix angles: 35°/38°
- unequal cutting edge pitch
- with edge protection chamfer
- with neck reduction
- Cutting edge with edge preparation
Advantage
- Increased material removal rate
- high level of process reliability up to 2xD
- higher feed rates and cutting depths possible
- reduced vibration
- ideal for static and dynamic trochoidal milling
Brand | ATORN |
EAN | 4066107125707 |
Manufacturer Part Number | 11240027 |
Minimum order quantity | 1 |
Cutting material | SC |
Surface | ULTRA |
Type | N |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 35°, 38° |
Tool holding device | HA parallel shank |
Construction length | Short |
Cutting edge diameter | 12 mm |
Cutting edge length | 12 mm |
Clearance length | 26 mm |
Length | 73 mm |
Edge protection chamfer length | 0.2 mm |
Clearance diameter | 11 mm |
Shank diameter | 12 mm |
fz steel 1000 | 0.13 mm |
Harmonized System Code | 82077010 |
Gross Weight | 0.127 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 230-275 | 0.008 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 230-275 | 0.008 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 230-275 | 0.008 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 160-200 | 0.008 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-150 | 0.008 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 140-180 | 0.008 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 110-130 | 0.005 | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 110-140 | 0.005 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 100-120 | 0.005 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 100-120 | 0.005 | ⚫ |
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 180-220 | 0.012 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 150-180 | 0.01 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 120-150 | 0.01 | ⚫ |
Last viewed
PFERD twist drill INOX diameter 6.7 mm HSS-E Co5 N DIN 338 135 degrees
ATORN Indexable insert CBN CCGW 09T308 ABC X15-B-2
RAU Jerry worktable, height-adjustable 1250x800x800-850 mm EGB melamine top
RAACO CarryLite 80 5x10-0/DLU assortment case with sandwich lid with U profile
RAACO CarryLite 80 4x8-0/DLU assortment case with sandwich lid with U profile
UVEX Men's dungarees suXXeed multifunction yellow warning yellow 58 8964912
MELUTEC DAkkS without sticker for micrometer head 0-25 mm
MELUTEC DAkkS calibration for tape rules 3 m
ORION Die HSS EN 24231 G 3/4 in tolerance A outer diameter 55 mm
RIEGLER Distinctive push-in fitting Nominal diameter 7.8 Brass bright 107678