ATORN SC HPC POWER end mill steel T4 5x10x15x54 mm HB type N long
Brand: ATORN
Surface: ULTRA
Length: 54 mm
Art.-no. 16854852
Manufacturer article no. 11240030
EAN 4066107125738
Application
HPC end mill for machining steel and cast iron. Low-vibration, multi-functional and high-performance tool for roughing and finishing up to 2xD.
Execution
- SC ultra-fine grain
- ULTRA high-performance coating
- Centre cutting
- unequal helix angles: 35°/38°
- unequal cutting edge pitch
- with edge protection chamfer
- with neck reduction
- Cutting edge with edge preparation
Advantage
- Increased material removal rate
- high level of process reliability up to 2xD
- higher feed rates and cutting depths possible
- reduced vibration
- ideal for static and dynamic trochoidal milling
Brand | ATORN |
Manufacturer Part Number | 11240030 |
Cutting material | SC |
Surface | ULTRA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 35°, 38° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 5 mm |
Cutting edge length | 10 mm |
Clearance length | 15 mm |
Length | 54 mm |
Edge protection chamfer length | 0.15 mm |
Clearance diameter | 4.7 mm |
Shank diameter | 6 mm |
fz steel 1000 | 0.06 mm |
Harmonized System Code | 82077010 |
Gross Weight | 0.030 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 230-275 | 0.05-0.07 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 230-275 | 0.05-0.07 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 230-275 | 0.05-0.07 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 160-200 | 0.04-0.07 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-150 | 0.04-0.06 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 140-180 | 0.04-0.06 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 110-130 | 0.03-0.05 | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 110-140 | 0.03-0.05 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 100-120 | 0.03-0.05 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 100-120 | 0.03-0.05 | ⚫ |
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 180-220 | 0.06-0.09 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 150-180 | 0.05-0.07 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 120-150 | 0.05-0.07 | ⚫ |
Last viewed
Ignition coil removal tool set for VAG, 4-piece
GEARplus ratchet combination wrench, reversible, 6 mm on hanger
MAKITA Sickle blade 38 cm 1913G8-3
1/2 inch hex socket bit, long, 6 mm
BRONZEplus sledgehammer 5000 g, with hickory handle
KLINGSPOR velcro-backed grinding wheels 125 mm grain 220 without hole 97176
DURABLE anti-slip tape DURALINE® GRIP, 75 mm, yellow-black
Visco fan wrench for Mercedes 150.3301
Adapter, small
Vibration damper holding wrench for Ford and Volvo