ATORN SC mini radius cutter TiAlSiN 3x3.5x60 mm clearance 2.92x25 mm
Brand: ATORN
Surface: RockTec PRO
Length: 60 mm
Art.-no. 16954096
Manufacturer article no. 11264419
EAN 4050293656480
Application
Mini radius cutter with long neck for machining materials up to 65 HRC.
Execution
- Cutting material, Ultra Micro fine grain
- cutting edge finish
- HA shaft in line with DIN 6535
- Clearance
- type H
- With RockTec PRO coating
- Radius tolerance = 0/-0.005 mm
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
EAN | 4050293656480 |
Manufacturer Part Number | 11264419 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 20° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 3 mm |
Cutting edge length | 3.5 mm |
Clearance length | 25 mm |
Length | 60 mm |
Clearance diameter | 2.92 mm |
Shank diameter | 4 mm |
fz hard 65 HRC | 0.024 mm |
Product Group | 152 |
Gross Weight | 0.030 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | 0.028 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | 0.028 | ⚪ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | 0.028 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | 0.028 | ⚫ | |
Last viewed
9 mm screw hose clamps for hose diameter 16-27 mm
ORION high-perf. drill, SC TiAlN, HPC 5xD 15.1 mm x 16 mm x 133 mm HB internal
PRO FIT safety goggles Viper
ORION thread no-go ring gauge M 14x1.25 ISO 6g DIN 2299-1
DIATEST probe head 0.85-0.97 mm
Extra charge for ELECTRONIC CODE combination lock
ATORN HPC reamer SC TiAIN, T=4 B 7–8° 11.0 mm 0–0.005 mm x 120 mm x 20 mm HA
Test pin, steel, tolerance class 1, dia. 5.41 x 70 mm
MAHR 3-pt int meas pistol set 6–12 mm, dial gauge Marcator1086R, Micromar 844A
Dial gauge 0.001 mm scale interval 5 mm measuring range