ATORN SC mini torus mill cttr TiAlSiN 2.5x2.5x50 mm clearance 2.41x10mm R 0.3
Brand: ATORN
Surface: RockTec PRO
Length: 50 mm
Art.-no. 16952103
Manufacturer article no. 11264209
EAN 4050293654387
Application
Torus milling cutter with long neck for machining materials up to 65 HRC, e.g. for countersinking and mould making.
Execution
- Cutting material, Ultra Micro fine grain
- cutting edge finish
- HA shaft in line with DIN 6535
- Clearance
- type H
- With RockTec PRO coating
- Radius tolerance = +/- 0.0025 mm
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
EAN | 4050293654387 |
Manufacturer Part Number | 11264209 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 2.5 mm |
Cutting edge length | 2.5 mm |
Clearance length | 10 mm |
Length | 50 mm |
Clearance diameter | 2.41 mm |
Shank diameter | 4 mm |
Edge radius | 0.3 mm |
fz hard 65 HRC | 0.021 mm |
Product Group | 152 |
Gross Weight | 0.022 kg |
Last viewed
ORION square end mill DIN 844B/N long 18.0 x 63 x 123mm HSSE8 Z3
ATORN high-perf. drill, SC TiAlN, HPC 30 x D 11.8 mm x12 mm x430 mm HA internal
ATORN twist drill U4 HSSE, DIN 1897, 1.8 mm x 36 mm x 11 mm, 118°
ORION high-perf. drill bit SC TiNAlOX HPC 5xD 4.0 x 6 x 74 mm HB shank with IC
MILWAUKEE PACKOUT rails, 50 cm, for PACKOUT rail system for wall mounting
RÖHM revolving centring point MK 4 in wooden case
Test pin, steel, tolerance class 1, dia. 9.93 x 70 mm
AUTOSTAT 7236/4 spring balance 45-55 kg with stop
Crate dolly 1187, ALU quintet sheet, load cap. 250 kg, load area 500x500 mm
ORION metal circ saw blade, HSS, finely toothed, 100 mm x 0.6 mm x 22 mm A T=160