ATORN SC radius cutter TiAlSiN 20x22x126 mm radius 10 mm
Brand: ATORN
Surface: RockTec PRO
Length: 126 mm
Art.-no. 16954274
Manufacturer article no. 11264093
EAN 4050293653229
Application
Radius milling cutter, standard design, for machining materials up to 65 HRC, e.g. in dip cutting and mould construction.
Execution
- Cutting material, Ultra Micro fine grain
- cutting edge finish
- HA shaft in line with DIN 6535
- Clearance
- type H
- With RockTec PRO coating
- Radius tolerance = +/- 0.005 mm
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
EAN | 4050293653229 |
Manufacturer Part Number | 11264093 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Long |
Cutting edge diameter | 20 mm |
Cutting edge length | 22 mm |
Length | 126 mm |
Shank diameter | 20 mm |
fz hard 65 HRC | 0.095 mm |
Product Group | 152 |
Gross Weight | 0.360 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | 0.150 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | 0.150 | ⚪ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | 0.150 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | 0.150 | ⚫ | |
Last viewed
BOSCH ProCORE 18 V 8.0 Ah battery pack, charging time 64 mins
DIEBOLD US 1100 horizontal shrink unit with basic coil 400 V 16 A 11 kW
ORION high-perf. drill, SC TiAlN, HPC 5xD 13.5 mm x 14 mm x 124 mm HB external
ATORN twist drill N HSS shaft (12.7) 17.0 mm x 152 mm x 76 mm 118°
Test pin, steel, tolerance class 1, dia. 6.58 x 70 mm
AUTOSTAT 7261/1 spring balance 150-175 kg w. patent. spring overwind prot.
HK roller container HxWxD 790 x 570 x 680 mm w. 4 fully-ext. drawers
FAHRION collet chuck DIN6343 185E 22, square
Abrasive cloth in tear-off box, roll 50 m x 40 mm, grain size 80
BOSCH Expert HEX-9 MultiConstruction drill bit 4x45x90 mm with hexagon shank