ATORN SC radius cutter TiAlSiN 8x9x85 mm radius 4 mm
Brand: ATORN
Surface: RockTec PRO
Length: 85 mm
Art.-no. 16954266
Manufacturer article no. 11264089
EAN 4050293653182
Application
Radius milling cutter, standard design, for machining materials up to 65 HRC, e.g. in dip cutting and mould construction.
Execution
- Cutting material, Ultra Micro fine grain
- cutting edge finish
- HA shaft in line with DIN 6535
- Clearance
- type H
- With RockTec PRO coating
- Radius tolerance = +/- 0.005 mm
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
EAN | 4050293653182 |
Manufacturer Part Number | 11264089 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Long |
Cutting edge diameter | 8 mm |
Cutting edge length | 9 mm |
Length | 85 mm |
Shank diameter | 8 mm |
fz hard 65 HRC | 0.057 mm |
Product Group | 152 |
Gross Weight | 0.036 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | 0.065 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | 0.065 | ⚪ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | 0.065 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | 0.065 | ⚫ | |
Last viewed
ATORN NC reamer SC T=3 B 7-8° 1.0mm 0-0.003 x 34 x 6mm HA sim. to DIN 8093
HK batt. ch. cab., sol. sh. met. doors, 1030x1000x500 mm, 3 shel., RAL 7035/5010
ANKE combination workbench 703 V uni coating panel 1500x700x850 mm
META dbl plug-in rack CLIP 150 RAL7035 comp. add-on sh. 2000x1000x300 mm 2x5 sh.
ORION limit plug gauge, CC/steel 16 mm in diameter, selectable tolerances
Corner posts partitioning system height (H) 2200mm incl. sleeve anchor
METABO GVB 18 LTX BL 11-7 HT cordless die grinder, cardboard box
Test pin, steel, tolerance class 1, dia. 5.73 x 70 mm
ORION collets DIN 6388 B 462 E diameter 2 mm
GEDORE TORCOFIX K torque wrench, 150–750 Nm, pass-through square 3/4 inch