ATORN SC rghng. ctr. D 16.0 x 32 x 46 x 92mm, HB shaft 4 cutting edges, ULTRA MS
Brand: ATORN
Surface: ULTRA MS
Length: 92 mm
Art.-no. 16670248
Manufacturer article no. 11861059
EAN 4050293359831
Application
Roughing cutter with unequal cutting pitch for machining stainless steels and titanium/Ni/Co alloys.
Execution
- Ultra-fine grain cemented carbide
- HB straight shank
- With clearance
- ULTRA MS high-performance coating
- With edge protection chamfer
- Defined cutting edge rounding
- Centre cutting
Advantage
- High-performance roughing
- Optimised, positive cutting geometry
- Excellent chip removal and temperature resistance
- Maximum service life thanks to ULTRA MS coating
Brand | ATORN |
EAN | 4050293359831 |
Manufacturer Part Number | 11861059 |
Minimum order quantity | 1 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 40° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 16 mm |
Cutting edge length | 32 mm |
Clearance length | 50 mm |
Length | 92 mm |
Edge protection chamfer length | 0.3 mm |
Clearance diameter | 15 mm |
Shank diameter | 16 mm |
fz stainless steel | 0.052 mm |
Harmonized System Code | 82077031 |
Gross Weight | 0.230 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 120-140 | 0.028 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 130-150 | 0.028 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 130-150 | 0.028 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 120-140 | 0.028 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 120-140 | 0.028 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | - | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | - | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | - | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | - | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | - | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 60-80 | 0.023 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 60-80 | 0.031 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 60-80 | 0.023 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 60-80 | 0.031 | ⚫ |
Last viewed
MAKITA Suction pipe set straight P-70437
WIDIA High-performance indexable inserts SNMG 120412-MS WS25PT
FEIN HSS SPECIAL 25 core drill with 3/4 in Weldon diameter 17 mm
KÜBLER Light cardigan, anthracite/black, size XS 1441 6335-9799-XS
C+P Classic PLUS locker cabinet, base, 15 comp. 1,950x900x500 mm RAL 7035/6011
C+P Locker cabinet Resisto 4 compartments H1077B772D540 mm No 8472-272|S10137
C+P Classic locker, 4 compartments, H1850B1190D500 mm, light gray No. 8210-40|S10000
MAKITA saw rail 90PX length 20 cm 3/8 inch width 1.1 mm 191G13-5
ATORN Solid carbide end mill Z3 HB shaft diameter 10x16x100 mm with IC
MAKITA cordless blower 18V blowing force 2.5 N 18000 rpm DUB186Z