ATORN SC torus milling cutter T3 HB, 8.0 x 21 x 25 x 63, R0.5, coated
Brand: ATORN
Surface: ULTRA N
Length: 63 mm
Art.-no. 16653640
Manufacturer article no. 11263664
EAN 4050293342642
Application
HPC torus milling cutter for roughing and finishing non-ferrous metals.
Execution
- Solid carbide ultra-fine grain
- Straight shank in accordance with DIN 6535 HB
- Defined edge rounding of the blade
- Radius tolerance = +/- 0.01 mm
- Centre cutting
- With clearance
- ZrCN ULTRA N-coated
Advantage
- Higher feed rates and cutting depths possible
- Defined edge rounding for outstanding service life
Brand | ATORN |
EAN | 4050293342642 |
Manufacturer Part Number | 11263664 |
Minimum order quantity | 1 |
Cutting material | SC |
Surface | ULTRA N |
Type | W |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 45° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 8 mm |
Cutting edge length | 21 mm |
Clearance length | 25 mm |
Length | 63 mm |
Clearance diameter | 7.6 mm |
Shank diameter | 8 mm |
Edge radius | 0.5 mm |
fz aluminium | 0.05 mm |
Harmonized System Code | 82077031 |
Gross Weight | 0.020 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 375-550 | 0.025 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 175-275 | 0.025 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 225-375 | 0.025 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 175-275 | 0.025 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 225-375 | 0.025 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 175-275 | 0.025 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 375-550 | 0.025 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 275-450 | 0.025 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 225-375 | 0.025 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
Last viewed
HALDER SIMPLEX robinia wood handle 335 mm for 60 mm hammer
BOSCH GDS 18V-330 HC cordless impact wrench bare unit C breakaway torque 560 Nm
PFERD tool holder for grinding tools with 5mm bore Clamping range 0-10mm
MAKITA diamond core drill bit diameter 65 mm M14 dry drilling D-44591
KÖGEL HV 50 hardness reference plate, hardness value approx. 750 incl. DAkkS
GEDORE Combination wrench UD profile 3/16 inch 1436767
ORION End mill HSSE5 NR, extra-long, 32.0 x 180 x 260 mm DIN 1835B shaft
SATA filter 444 2-stage sinter filter/fine filter pressure regulator 92296
SMC water separator 3/8 inch AMG250C-F03D
SAUTER adapter AFM 19 Male thread M12 Threaded hole M18×1.5 Material steel