ATORN SC torus milling cutter TiAlSiN 16x18x92 mm clearance 15.4x44 mm R 2 mm
Brand: ATORN
Surface: RockTec PRO
Length: 92 mm
Art.-no. 16952280
Manufacturer article no. 11264280
EAN 4050293655094
Application
Torus milling cutter for processing materials up to 65 HRC, e.g. for die and mould making.
Execution
- Cutting material, Ultra Micro fine grain
- cutting edge finish
- HA shaft in line with DIN 6535
- Clearance
- type H
- With RockTec PRO coating
- Radius tolerance = +/- 0.005 mm
Advantage
- optimum chip removal and temperature resistance
- Optimised geometry for machining hard materials
- maximum service life thanks to RockTec PRO coating
Brand | ATORN |
EAN | 4050293655094 |
Manufacturer Part Number | 11264280 |
Cutting material | SC |
Surface | RockTec PRO |
Type | H |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 16 mm |
Cutting edge length | 18 mm |
Clearance length | 44 mm |
Length | 92 mm |
Clearance diameter | 15.4 mm |
Shank diameter | 16 mm |
Edge radius | 2 mm |
fz hard 65 HRC | 0.088 mm |
Product Group | 152 |
Gross Weight | 0.210 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 120-200 | 0.110 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 120-200 | 0.110 | ⚪ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 80-150 | 0.110 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 60-130 | 0.110 | ⚫ | |
Last viewed
ATORN metal circ saw blade, SC, finely toothed, 20 mm x 0.25 mm x 5 mm A T=64
Drawer, 120mm/100mm, full ext., 100 kg, RAL 7035/7016 for 550 S int.: 600x450mm
Swing door, 2-leaf, 3000 x 2000 mm, clear/transparent with woven mesh insert
ATORN boring bar head positive A08 SCLCR 06
ATORN NC reamer HSSE T=6 D 7-8° 6.7mm H7 x 101mm x 28mm HA DIN 212
ATORN thread insert M8 1.25 x 16.2 mm
ORION single open-end wrench 27 mm DIN 894
ATORN thread cutt. inserts, sub-prof 60° HC5630 16 (ER/EL) A60 R 0.5-1.5mm
ATORN electr. tensile and compressive force meas. unit, type ZD3, MB 0–1000 N
ATORN thread boring bars, internal, left, SIR/L 0016 P16