ATORN Solid carbide twist drill bit TiALN type N 5xD 8.0 mm x 117 mm 118°
Brand: ATORN
Surface: TiAlN
Length: 117 mm
DIN: 338
Minimum order quantity: 1
Art.-no. 11157080
Manufacturer article no. 10473059
EAN 4050293039443
Brand | ATORN |
EAN | 4050293039443 |
Manufacturer Part Number | 10473059 |
Cutting material | SC |
Surface | TiAlN |
Type | N |
Tool holding device | HA parallel shank |
Cutting edge diameter | 8 mm |
Chip flute length | 75 mm |
Length | 117 mm |
f steel 1000 | 0.12 mm/r |
DIN | 338 |
Harmonized System Code | 82075050 |
Minimum order quantity | 1 |
Gross Weight | 0.063 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 80-100 | 0.02 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 75-100 | 0.02 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 60-100 | 0.02 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 70-100 | 0.02 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 60-80 | 0.02 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 60-80 | 0.02 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 25-40 | 0.02 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 55-80 | 0.02 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 60-85 | 0.02 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 40-80 | 0.02 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 30-40 | 0.02 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 200-300 | 0.03 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 180-220 | 0.03 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 110-170 | 0.02 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 120-130 | 0.02 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 120-200 | 0.03 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 250-280 | 0.03 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 30-100 | 0.03 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 30-80 | 0.03 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 30-70 | 0.02 | ⚪ | |
| 3.10 Graphite | C8000 | <60 | 85-130 | 0.02 | ⚪ | |
| 3.11 Composite materials | - | - | ⚪ | |||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 85-135 | 0.02 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 80-120 | 0.02 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 80-120 | 0.02 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 35-40 | 0.02 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 30-45 | 0.02 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 20-40 | 0.02 | ⚪ |
Last viewed
HAZET bit 2206-6 Hexagon 5/16 inch (8 mm) Internal hexagon profile 6 mm
ATORN Solid carbide end mill T4 long HA, 8.0 x 24 x 30 x 72 mm, coated
HAZET 2-component soft foam insert 163-361L
GO thread plug gauge M52x1 6H left-hand thread
ATORN Individual Test Pin RSB TK1 2.55 mm x 70 mm
GESIPA PowerBird Pro Gold Edition CAS without battery / without charger in L-Boxx 1679665
RIEGLER Temperature control coupling 107971
KS TOOLS 1/2 inch CHROMEplus hex socket, 30 mm
UVEX Men's softshell jacket suXXeed gray graphite M 8933010
ATORN Steel block jaws set, AVM 5-axis clamp