ATORN countersink, 90°, HSSE, T=3, 40.0 x 75 mm, DIN 335 shape C
Brand: ATORN
Surface: Uncoated
Length: 75 mm
DIN: 335
Art.-no. 11500751
Manufacturer article no. 10647221
EAN 4050293635324
Application
For producing 90° counterbores up to 1300 N/mm².
Execution
- profile-ground triple-edge countersink with radial relief
Advantage
- radial relief ensures optimum chip breaking
Brand | ATORN |
EAN | 4050293635324 |
Manufacturer Part Number | 10647221 |
Countersink angle | 90 Degree |
Cutting material | HSSE |
Surface | Uncoated |
Number of cutting edges | 3 PCS |
Tool holding device | HA parallel shank |
Spot-facer diameter | 40 mm |
Tip diameter | 10 mm |
Shank diameter | 12 mm |
Length | 75 mm |
f steel 1000 | 0.21 mm/r |
DIN | 335 |
Product Group | 1EB |
Gross Weight | 0.182 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 25-35 | 0.25 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 25-35 | 0.25 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 25-30 | 0.25 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 25-30 | 0.25 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 15-20 | 0.18 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 8-20 | 0.18 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 5-12 | 0.18 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 5-10 | 0.18 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 8-17 | 0.18 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 3-10 | 0.18 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 3-12 | 0.18 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 50-90 | 0.3 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 25-60 | 0.3 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 25-45 | 0.25 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 25-50 | 0.25 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 40-80 | 0.3 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 40-80 | 0.3 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 15-50 | 0.3 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 15-50 | 0.3 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | |||
| 3.10 Graphite | C8000 | <60 | 15-25 | 0.3 | ||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 10-20 | 0.25 | ⚪ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 10-20 | 0.25 | ⚪ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 10-20 | 0.25 | ⚪ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 4-12 | 0.12 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 2-6 | 0.12 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 2-6 | 0.12 | |
Last viewed
ORION double open-end wrench 10 x 13 mm DIN 895
ENERPAC hydraulic bench-mounted press VLP106 P14
ATORN solid carbide drill UNI TiAlNplus 5xD with IC 12.6 mm straight shank HA
DAkkS calibration micrometer head <= 25 mm
TEC 5 pressure spray with NBR seal, 5 l
Stacking stool, height 550 mm, round beech seat, dia. 350 mm RAL 7035 light grey
ATORN SC TVC end mill, aluminium diameter 20.0x62x70x126mm teeth=4 HB shaft
ORION machinist's hammer DIN 1041 2.000 kg with ash handle
ORION high-perf. drill, SC TiAlN, HPC 5xD 5.6 mm x 6 mm x 82 mm HB internal
SIA 7500 sianet CER net-backed abrasive, diameter 125 mm, P100