ATORN end mill, 90 degrees, 32.0 mm T=4
Brand: ATORN
Length: 125 mm
Art.-no. 16016332
Manufacturer article no. 11117532
EAN 4050293344448
Application
4 flutes per indexable milling insert and special chip breaker geometry for profitability and high cutting rates when milling faces, milling corners, trimming and milling grooves.
Execution
- with Weldon shaft
- wear-proof, nickel-plated design
- with internal cooling
Advantage
- 4 cutting edges on double-sided indexable insert
- special chip breaker geometry enables low power consumption
- large insert thickness
Brand | ATORN |
EAN | 4050293344448 |
Manufacturer Part Number | 11117532 |
Cutting edge diameter (D) | 32 mm |
Clearance length (L2) | 40 mm |
Length (L1) | 125 mm |
Shank diameter (d) | 25 mm |
max. ap | 9 mm |
Number of cutting edges | 4 PCS |
Suitable indexable insert no. (WSP Typ) | 1 |
Harmonized System Code | 82077010 |
Gross Weight | 0.035 kg |
Last viewed
SATA air micrometer w/ pressure gauge, 1/4 inch ext. and G 1/4 inch int. thread
PFERD STEEL mounted point taper diameter 10x25 mm shank 6 mm A80 for steel
ATORN test pin corrosion and acid resistant TC1 7.91 mm x 70 mm
Probe arm 120/2.5 HM25, cem carbide tip for contour meas. dev. ATORN easyCONTOUR
ATORN thread cutting insert 16IR3.0ISO HC5110
PFERD HSS burr cylindrical shape face A-ST diameter 06x16mm shank 6mm Z3
BOSCH Expert SDS plus-7X hammer drill bit set 6/8/10 mm, 3 pcs
ACTION Socket 1/2 inch SW 11/4 inch DO63820108