ATORN reamer VHM T=6 B, 7-8° 20.0mm H7 x 195mm x 56mm HA DIN 8093
Brand: ATORN
Surface: Uncoated
Length: 195 mm
DIN: 8093
Art.-no. 11744200
Manufacturer article no. 10045380
EAN 4050293355505
Application
For producing H7 fit tolerances in through holes on conventional machines and NC machines up to 1300 N/mm².
Execution
- 7-8° left-hand spiral and variable pitch, type B
Advantage
- good bore hole quality (dimensional tolerance, roundness, surface quality)
Brand | ATORN |
EAN | 4050293355505 |
Manufacturer Part Number | 10045380 |
Cutting material | Carbide |
Tolerance of fit | H7 |
Groove type | Left-hand twist, 7-8° |
Surface | Uncoated |
Tool holding device | HA parallel shank |
Cutting edge diameter | 20 mm |
Length | 195 mm |
Cutting edge length | 56 mm |
Projecting length | 137 mm |
Shank diameter | 16 mm |
Number of cutting edges | 6 PCS |
f steel 1300 | 0.2 mm/r |
DIN | 8093 |
Product Group | 1BJ |
Gross Weight | 0.303 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/U] | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 25-30 | 0.3 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 22-25 | 0.3 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 22-25 | 0.3 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 20-25 | 0.3 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 25-30 | 0.3 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 15-20 | 0.3 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 10-15 | 0.25 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 15-20 | 0.25 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 15-20 | 0.25 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 10-12 | 0.3 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 10-15 | 0.25 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 20-60 | 0.35 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 20-40 | 0.35 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 20-40 | 0.4 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 20-30 | 0.4 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 20-50 | 0.35 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 20-40 | 0.35 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 20-50 | 0.4 | ⚪ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 15-35 | 0.4 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | - | |||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 25-30 | 0.3 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 20-25 | 0.3 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 20-25 | 0.3 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 7-12 | 0.25 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 7-12 | 0.25 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 7-12 | 0.25 | ⚪ |
Last viewed
ATORN safety steel band shears, 600 mm, with lever transmission
METABO WF 18 LTX 125 Quick cordless flat head angle grinder
DAkkS calibration thread ring gauge 100 - 200 mm
FAHRION sealing washers for internal cooling HP40-DI 20.00 mm 450 E/472 E
SHAVIV deburring insert F 26 X
Test pin, steel, tolerance class 1, dia. 6.89 x 70 mm
WITZENMANN coolant hose G 1/4 inch 250 mm without nozzle with thread M 12x1
BOSCH 1600Z00036 18 V 2 Ah Li-ion battery pack
KNIPEX electronics gripping pliers, 115 mm, flat wide jaws
RÖHM collet chuck CAPTIS GT 65 D22.0