ATORN screw-in holder HSK100 (ISO 12164) dia. 10 mm A=79 mm
Brand: ATORN
Length: 50 mm
Art.-no. 23161654
Manufacturer article no. 22660929
EAN 4050293713442
Application
For accommodating threaded screw-in milling cutters.
Execution
- Taper angle tolerance AT3
- Concentricity < 0.005 mm
Notes
The previous standard DIN 69871 was superseded by ISO 12164.
Delivery
1x HSK63 or HSK100 screw-in holder (ISO 12164)
 | |
Brand | ATORN |
EAN | 4050293713442 |
Manufacturer Part Number | 22660929 |
Tool holding device | HSK 100 |
Tool holding device type | Holder for screw-in milling cutter |
Form | A |
Thread dimension | M10 |
Projecting length (A) | 79 mm |
Collar diameter | 100 mm |
Length (L1) | 50 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Harmonized System Code | 84661020 |
Gross Weight | 1.020 kg |
Last viewed
Bolt for 700.5630
T-handle TX with front hole angle pin wrench T30 x 150 mm
ATORN countersink 4S 90° HSSE TiAlN, extreme unequal pitch dia. 23.0 mm
C+P CLASSIC PLUS locker, feet, 1 compartment 1,950x400x500 mm, RAL 7016/7016
Lock and key for 865.0020
1000V pliers and screwdriver set, 10 pieces
Replacement refill yellow, 4 pieces
45-degree angled corner pipe wrench, 1.1/2 inch
Pump lever holder
LEEVI XXNF BOA(R) black-lime Low ESD S3S safety shoe, size 40 724841-40