ATORN shrink-fit chuck 3° SK40 (ISO 7388-1) dia. 4 mm A=120 mm
Brand: ATORN
DIN: 69871-1
Art.-no. 23427044
Manufacturer article no. 21044765
EAN 4050293408546
Application
For clamping milling tools and drill bits with h6 shaft tolerance. Suitable for inductive, contact and hot air shrinking devices.
Execution
- Shrink grip and shrink release of carbide and HSS tools
- Hardness 52 + 2 HRC
- Maximum coolant pressure 80 bar
- 4 additional drill holes for fine balancing
- With Balluff chip hole
- Glass bead blasted
Advantage
- Slim design, extremely low interference contour
- High transmittable torques
- High positioning and repeat accuracy
- Ideal for high rotation speeds
Notes
The previous standard DIN 69871-1 was superseded by ISO 7388-1.
Delivery
1x SK40 shrink-fit chuck 3° (ISO 7388-1)
 | |
Brand | ATORN |
EAN | 4050293408546 |
Manufacturer Part Number | 21044765 |
Tool holding device | SK 40 |
Tool holding device type | Shrink chuck |
Form | AD/AF |
Projecting length (A) | 120 mm |
Coolant supply | Internal |
Balancing quality | G 2.5 at 25,000 rpm |
Harmonized System Code | 84661038 |
Gross Weight | 0.900 kg |
Last viewed
ATORN document holder for working documents DIN A4
Universal adapter set for brake bleeding, 20 pieces
MITUTOYO carbide-tipped marking-off needle 9x9 mm length 80 mm
TESA GT 622DC electronic length-measuring probe with analogue output
Open-end spanner with protective insulation, 16 mm
ERGOTORQUE VDE square drive screwdriver No. 1, 160 mm
ORION holder DIAROND / DIAPOINT type A
5/16 inch bit slot, 30 mm, 18 mm
Electrician's folding knife, 2 pointed blades
ATORN hacksaw blades, 32 teeth, 300x13x0.65mm, HSS bi-metal