ATORN solid carbide roughing cutter Z3 HA shaft diameter 10.0 x 23 x 72 mm
Brand: ATORN
Surface: ULTRA N PRO
Length: 72 mm
Art.-no. 16665810
Manufacturer article no. 12040770
EAN 4050293628180
Application
Suitable for rough cutting with outstanding material removal rates on NF metals.
Execution
- Solid carbide ultra-fine grain
- straight shank in line with DIN 6535 HB
- ULTRA-N PRO coated
- with edge protection chamfer
- Defined edge rounding of the cutting edge
- centre cutting
- Clearance
- Polish sanding
Advantage
- Ultra-smooth coating
- Excellent chip removal
- defined edge rounding for maximum service life
- Large chip area for optimum chip flow
- Ideal for NF metals and plastics
Brand | ATORN |
EAN | 4050293628180 |
Manufacturer Part Number | 12040770 |
Cutting material | SC |
Surface | ULTRA N PRO |
Type | WF |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 40° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 10 mm |
Cutting edge length | 23 mm |
Clearance length | 31 mm |
Length | 72 mm |
Edge protection chamfer length | 0.3 mm |
Clearance diameter | 9.8 mm |
Shank diameter | 10 mm |
fz aluminium | 0.125 mm |
Product Group | 1HJ |
Gross Weight | 0.100 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | ft [mm/T] for diameter | Suitability |
|---|---|---|---|---|---|---|
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 580-620 | 0,1440 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 540-580 | 0,1440 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 180-220 | 0,0440 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 300-340 | 0,0560 | ||
Last viewed
3M warning tape, red/white, not adhesive, 70 mm x 100 m
ATORN twist drill N HSS, steam-treated, DIN 338, 5.16 mm x 86 mm x 52 mm, 118°
BIMOS swivel work chair, NEON, w. wheels and permanent contact backrest, green
RÖHM collet chuck CAPTIS GT65 D42.0
ATORN CKJN clamp holder, negative, right, CKJN R/L 2525 M16
DAkkS calibration for micrometer up to 100 mm with setting standard up to 50 mm
ATORN high-perf. drill, SC TiAlN 180° 3xD 10.2 mm x 12 mm x 102 mm
ORION double-jaw limited snap gauge 30 mm
Test pin, steel, tolerance class 1, dia. 8.67 x 70 mm
TESTO Smart Probe VAC set M1, Bluetooth data transfer, 3 x Micro AAA