ATORN twist drill VA HSSE, DIN 345, MT 1, 13.0 mm x 182 mm x 101 mm, 130°
Brand: ATORN
Surface: Uncoated
DIN: 345
Length: 182 mm
Art.-no. 11074144
Manufacturer article no. 10472556
EAN 4050293034806
Application
For use in stainless steel, special alloys up to a strength of 1300 N/mm².
Execution
- twist drill with stainless steel profile
Advantage
- Special geometry with aggressive cutter design and free geometry for very smooth cutting
Brand | ATORN |
EAN | 4050293034806 |
Manufacturer Part Number | 10472556 |
Cutting material | HSSE |
Surface | Uncoated |
Type | VA |
Angle of the tip | 130 Degree |
DIN | 345 |
Tool holding device | Morse taper shank |
Cutting edge diameter | 13 mm |
Chip flute length | 101 mm |
Length | 182 mm |
Morse taper size | MK 1 |
f steel 700 | 0.25 mm/r |
Product Group | 112 |
Gross Weight | 0.111 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 25-45 | 0.2-0.28 | ⚪ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 25-45 | 0.2-0.28 | ⚪ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 20-40 | 0.15-0.2 | ⚪ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 18-25 | 0.15-0.2 | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 18-25 | 0.15-0.2 | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 10-25 | 0.1-0.18 | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 8-13 | 0.1-0.18 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 8-15 | 0.1-0.18 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 8-18 | 0.1-0.18 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 6-12 | 0.1-0.18 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 10-20 | 0.1-0.18 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 40-100 | 0.2-0.28 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 30-70 | 0.2-0.28 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 15-35 | 0.15-0.2 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 25-50 | 0.15-0.2 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 35-60 | 0.2-0.28 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 20-40 | 0.2-0.28 | ||
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 60-110 | 0.2-0.28 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 10-25 | 0.2-0.28 | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 10-30 | 0.1-0.18 | ||
| 3.10 Graphite | C8000 | <60 | 10-30 | 0.1-0.18 | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 20-35 | 0.2-0.28 | |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 20-35 | 0.2-0.28 | |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 20-35 | 0.2-0.28 | |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 3-10 | 0.1-0.18 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 3-10 | 0.1-0.18 | ⚫ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 3-10 | 0.1-0.18 | ⚫ |
Last viewed
TOKU pneumatic grinder MG-7206B die grinder 23,000 rpm 6 mm
ORION thread cutting gauge for square and trapezoidal threads
ATORN metal circ saw blade, SC, finely toothed, 40 mm x 0.3 mm x 10 mm A T=100
Test pin, steel, tolerance class 1, dia. 9.09 x 70 mm
Test pin, steel, tolerance class 1, dia. 4.14 x 70 mm
ATORN twist drill N HSS, DIN 345, MT 1, 11.5 mm x 175 mm x 94 mm, 118°
ORION solid carbide chamfer cutter, 90 degrees, dia. = 3.0 mm shank DIN 6535 HA
ATORN SC TiAlSiN HPC hard drill 5xD 11.8 mm x 12 mm x 118 mm, HA shaft, with IC
ATORN NC reamer SC T=3 B 7-8° 1.18-1.07x50x9mm HA DIN 8093, optional 0.01
STAHLWILLE socket wrench insert 8 mm 1/4 inch DIN 3124 long version