DAkkS w/o sticker f. outside micrometer set 0-150 mm, 6 screws and 5 standards
Brand: MELUTEC
Calibration Group Description: Setting gauges
Calibration Group: E
Art.-no. 30000658
Application
DAkkS and factory calibrations for outside micrometers with setting standards
Execution
- Outside micrometer sets
Notes
The prices listed only apply to initial calibration of new products. When ordering, please enter your test equipment followed by the calibration service.
If you are interested in recalibration, contact us on 07141 498-4848 or bestellung@hahn-kolb.de.
Brand | MELUTEC |
Type of calibration | DAkkS without badge |
Calibration Group Description | Setting gauges |
Area of application for calibration group | 0 - 150 mm |
Number of bracket measuring screws | 6 PCS |
Number of setting dimensions | 5 PCS |
Number of calibrations included | 11 PCS |
Calibration Group | E |
Calibration certificate | DAkkS calibration certificate |
Harmonized System Code | 00000000 |
Gross Weight | 0.001 kg |
Last viewed
ATORN twist drill VA HSSE, DIN 338, 3.9 mm x 75 mm x 43 mm, 130°
Plastic spreader wedge, 20x170 mm
BRONZEplus 6-point socket wrench, angled, 22 mm
BOSCH Expert SDS plus-7X hammer drill bit 22x200x250 mm
Laserliner SensoLite G 210 laser receiver set
Ratchet ring spanner, 20 mm
ASW socket 6.0 mm, length 50 mm with 1/4 inch hexagon drive
DAkkS calibration for 3-point inside micrometer set 50-100 mm, 3 heads, 2 rings
Precision needle file, flat end, 200 mm, Swiss cut 0, coarse
ATORN thread cutting insert 16IR12W HC5615