DIEBOLD Shrink-fit chuck SK 40 x 16 mm DIN 69871 AD
Brand: DIEBOLD
Length: 50 mm
Minimum order quantity: 1
Art.-no. 23425514
Manufacturer article no. 72.060.500.500
EAN 4039247160006
Application
For precise clamping of tools with straight shank h6.
Execution
- Concentricity tolerance of hollow shank taper for location hole dia.< 0.003 mm.
- Clamping diameter for h6 shank tolerance.
- For higher speeds, fine balancing is necessary.
- Required pull stud no. 23690.
Notes
The previous standard DIN 69871-1 was replaced by ISO 7388-1.
Delivery
1x shrink-fit chuck in accordance with ISO 7388-1 (DIN 69871).
 | |
Brand | DIEBOLD |
EAN | 4039247160006 |
Manufacturer Part Number | 72.060.500.500 |
Tool holding device | SK 40 |
Tool holding device type | Shrink chuck |
Form | AD |
Diameter (d) | 16 mm |
Projecting length (A) | 80 mm |
Diameter 2 (D) | 27 mm |
Collar diameter | 63.55 mm |
Length (L1) | 50 mm |
Coolant supply | Internal axial |
Balancing quality | G 2.5 at 25,000 rpm |
Harmonized System Code | 84661038 |
Minimum order quantity | 1 |
Gross Weight | 1.108 kg |
Last viewed
MUNK GUENZBURGER STEIGTECHNIK Mobile scaffolding 1.35x1.80 m ladders and outriggers H 10.35 m
ATORN Screw tap HSSE-PM TiCN M10x1.5 45° C 6HX 371
KÜBLER Jacket, anthracite, size XL 1250 5365-97-XL
KNIPEX Side cutters for electricians, 125 mm, chrome-plated, with chamfer
ATORN Screwdriver, T8
3M VHB (TM) Adhesive Tape 4912F White 25 mm x 16.5 m 2.0 mm 7000072303
RIEGLER 45-degree plug connection blue series plastic nickel-plated brass 109888
KS TOOLS Oil drain plug M22 x 1.5 x 18 mm for MAN
KÖGEL Additional calibration for a Knoop HRP
AUTOSTAT Balancer 8251/ 11 stainless steel