Factory calibration for two-point inside micrometers with jaws 5-100 mm
Brand: MELUTEC
Art.-no. 30004014
Manufacturer article no. K151-0100
Application
DAkkS and factory calibrations for inside micrometers
Execution
- 2-point inside micrometers with jaws
Notes
The prices listed only apply to initial calibration of new products. When ordering, please enter your test equipment followed by the calibration service.
If you are interested in recalibration, contact us on 07141 498-4848 or bestellung@hahn-kolb.de.
Brand | MELUTEC |
Manufacturer Part Number | K151-0100 |
Type of calibration | Factory calibration |
Area of application for calibration group | 5 - 100 mm |
Calibration certificate | Works calibration certificate |
Harmonized System Code | 49070090 |
Gross Weight | 0.001 kg |
Last viewed
DICK precision needle files, 160 mm, cut 00 flat-pointed
ERGOTORQUEplus screwdriver, TB27 on hanger
KABRU XXP Pro BOA(R) GTX High ESD S3S WR H safety lace-up boots 788031-44
Crimping ring spanner, offset, 1.5/8 inch
TPMS service kit for tyre pressure monitoring systems 06
Safety lace-up boots ANTONIO XXSG GTX Mid ESD S3S WR CI size 39 760941-39
Spindle M16x2/M10 x1.25, 240 mm long
1/4 inch 12-point socket, long 5/16 inch
ATORN thread profile inserts, trapezoid 30°, pitch 5-6 mm
Pair of Scania 320 half shells, inner diameter: 71 mm