GEDORE AUTOMOTIVE Assembly trolley for bearings and bushings, 189-piece set 3532666

The “MODULO 260” assembly trolley, with its unique configuration, offers the ideal mobile workstation for fast, organised and efficient repair work. Contents / Scope of application: Various drive components such as hydraulic cylinder 17 t KL-0040-2500, ring ratchet/open-end spanner, impact puller 4.8 kg KL-0049-31, as well as tension/compression spindles (mechanical, hydraulic), quick-release/clamping nuts and adapters from the KL-0039 series for driving the tool sets. Articulated handle KL-4007-411 and impact wrench/socket wrench sockets (SK / TX / XZN) for loosening and tightening wheel bearing centre bolts. Retaining ring pliers KL-0192-5 for removing and fitting wheel bearing retaining rings. Wire brush for derusting and cleaning various components. Wheel hub puller KL-0041-38, as well as wheel bearing tool sets from the KL-0041-4 series for pressing out and in wheel hub/bearing assemblies, e.g. for VW, Audi, Seat, Skoda, Ford, Mazda and Volvo. Puller from the KL-0174 series for removing conventional wheel hubs, as well as for pressing out bonded and seized drive shafts. Hook for impact puller KL-0049-360 A for removing wishbones from the suspension joint clamping bore. Wheel bearing tool sets from the KL-0039 series for pressing out and in almost all conventional wheel bearings and wheel hubs. Silent bearing tool sets from the KL-0039 series for pressing out and in silent and spherical bearings. Pressing devices from the KL-0326-1 series series for pressing out and in suspension/guide joints, e.g. on Mercedes and VW T4. Pressing devices of the KL-0610-1. series for pressing out and in silent bearings on the rear axle lower control arm, e.g. on Ford, Mazda, Volvo. Wheel bearing tool KL-2211-111. for removing seized, bolted wheel bearing assemblies, e.g. on Subaru. Technical data for assembly trolley: Dimensions H 985 x W 1200 x D 635 mm, beech multiplex worktop, 30 mm thick, oiled, total load capacity: 1000 kg / In mobile operation: 750 kg, 2x fixed castors, diameter 200 mm, and 2x swivel castors, diameter 125 mm, with total brakes, sheet steel, corrosion-resistant, scratch-resistant powder-coated in anthracite, Extra-wide drawers W 998 x D 474 mm with full extension, load capacity up to 70 kg, automatic drawer retraction with single-drawer lock and central locking, side panels with 10 x 38 mm Euro-hole pattern for attaching hooks and tools.