GEDORE AUTOMOTIVE Assembly trolley for commercial vehicles, 93-piece set 3532682

With its unique configuration, the "NFZ MODULO 820" assembly trolley provides the ideal mobile workstation for quick, organised and efficient repair work. Contents / Scope of application: Various drive components required to operate the tool sets, such as a 28 t hydraulic cylinder - KL-0040-2800, mounting adapter for hydraulic cylinders, suitable tension/compression spindles (M20 + M24) with compression nut (M24) and quick-release nut (M20). Various hand tools, such as a 3/4-inch socket set with reversible ratchet, cross-handle, extensions (200 + 400 mm) and hex socket sockets (22, 24, 27, 30, 32, 36, 38, 41, 46 mm) as well as an XL extra-long combination spanner set (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32, 36, 41 mm), a 3/4-inch screwdriver bit (internal hex: 14 mm) and a 1.5 kg fitter’s hammer. Wheel hub puller set - KL-1005-100 A for removing seized wheel hubs (with removable hub caps), e.g. on BPW, SAF and ZF axle systems with a bolt circle diameter of 8x275 mm and 10x335 mm. Wheel hub puller with compact bearing - KL-1005-110 for removing seized wheel hubs (with removable hub caps), e.g. on axle systems with a bolt circle diameter of 10x120, 10x122, 10x143, 10x165, 10x168, 10x225, 12x144, 12x145, 12x164, 12x168, 14x138, 14x144. 28-tonne press frame - KL-1039-111 for pressing out and pressing in a wide variety of bushings, bearings or bolts directly on the vehicle, e.g. on boom arms, tippers, skip loaders, lifting arms, hook-lift systems, chassis components and many more. Ball joint puller set (with 6 forks) - KL-0165-3 A for loosening ball joint connections, e.g. on axle and steering systems. Tie rod end removal tool - KL-0169-82 for removing and installing stiff tie rod ends, e.g. during wheel alignment work and when replacing the tie rod end. Various sets from the KL-1010- series of silent block pullers for removing and fitting slotted and closed silent blocks (diameter 60 + 65 mm) directly on the vehicle, e.g. on leaf springs and bearing blocks. Wheel hub lifting tool – KL-1029-300 for lifting heavy wheel hubs without the assistance of a second person, using a workshop crane. Impact double hex key SW24 - KL-1070-1224 for loosening and tightening stiff brake caliper bolts with SK profile on BPW and SAF axles. Technical data for assembly trolley: Dimensions H 985 x W 1200 x D 635 mm, beech multiplex worktop, 30 mm thick, oiled, total load capacity: 1000 kg / In mobile operation: 750 kg, 2x fixed castors, diameter 200 mm, and 2x swivel castors, diameter 125 mm, with total locks, sheet steel, corrosion-resistant, scratch-resistant powder-coated in anthracite, Extra-wide drawers W 998 x D 474 mm with full extension, load capacity up to 70 kg, automatic drawer retraction with single-drawer lock and central locking, side panels with 10 x 38 mm Euro-hole pattern for attaching hooks and tools.