GESIPA PowerBird Pro Gold Edition CAS 1 Li-ion battery 18V-2.0 Ah charger L-Boxx 1680296

PowerBird Pro Gold Edition. The powerhouse for high volumes and fast work cycles. Even more powerful. Thanks to the brushless motor and 20,000 N setting force, it is even more powerful. The auto-reverse function enables a faster setting process; the PowerBird® Pro GE is immediately ready for work again. With a stroke of 25 mm, setting particularly long rivets is no problem. Even faster, virtually no wear. As no wear-prone brushes are used, the motor of the PowerBird Pro Gold Edition is extremely durable, virtually wear-free and reliably ensures the fastest setting frequencies. Tried and tested, and ergonomic. The PowerBird Pro Gold Edition is also equipped with the tried-and-tested, low-wear chuck system and the ergonomic design of the TAURUS series. The Variable. Blind rivets up to 6.4 mm in diameter for all materials and up to 8 mm in diameter for aluminium. BULB-TITE blind rivets up to 7.7 mm in diameter for all materials. MEGA GRIP and G-Bulb blind rivets up to 6.4 mm in diameter for all materials. Please ensure you use the correct pressure sleeve in accordance with the operating instructions! Technical data. Setting force: 20,000 N. Weight: 2.1 kg including battery. Drive: Brushless motor (BLDC). Working stroke: 25 mm. Equipment. Nozzles: 17/32, 17/36, 17/40 and 17/45. Additional pressure sleeve for smaller blind rivet dimensions. Bird Pro series with pressure-activated trigger The pressure-activated trigger ensures that the components to be riveted lie reliably against each other without a gap prior to the riveting process. It also ensures that the blind rivet reaches its final position in the hole before the setting process and that the setting head is in contact. The pressure force can be variably adjusted using springs, depending on the application. How it works: The pressure-activated trigger mechanism is additionally installed on the trigger button of the tool. It only allows the riveting tool to be triggered once an adjustable pressure force has been applied to the components. This ensures that the various components of the application are correctly pressed together before the riveting process. This prevents uncontrolled deformation of the rivet shank between the materials, which would otherwise go undetected. The clamping force can be adjusted in five steps. The setting is adjusted by adding or removing springs. This prevents any unintended adjustment of the defined clamping force. A push-button switch has been fitted upstream of the standard trigger button. Only when the selected spring force is overcome and the defined clamping force is thus reached can the riveting process be initiated by pressing the yellow trigger button. The clamping trigger is supplied fully assembled only. Retrofitting is only possible via GESIPA.