HAZET Cordless drill/driver 9530-10

18-volt cordless drill/driver. Base unit without battery or charger. Compact, powerful drill/driver with an extremely short head length. Quick-action metal drill chuck with Auto Lock function. Drill bit diameter: 1.5–13 mm. Electronic quick-stop brake. Forward/reverse rotation with start lock. Ergonomic, non-slip rubberised grip. LED light with afterglow function. Belt clip and bit holder. Number of torque settings: 18 + 1. Maximum tightening torque: hard: 65 Nm; soft: 35 Nm. No-load speed, setting 1: 0–500 revolutions per minute. Setting 2: 0–1,800 revolutions per minute. LED battery capacity indicator on the battery pack. Compatible with all 18-volt battery packs in the 9500 series. Weight (without battery): 1.14 kg. Brushless DC motor (BLDC): Longer service life, low wear, no need to replace carbon brushes. High efficiency and therefore lower battery consumption – a more compact motor enables smaller dimensions. Electronic Management System (EMS) protects the machine, extends its service life and increases efficiency. Maximum bearing temperature: 50° C. Metal construction with start-up ring. Sound power level: 89 dB(A) Lp W. Vibration acceleration: 1.02 m/s². Dimensions: 149 mm x 69 mm x 208 mm. Operating temperature range: -10°C – 40°C. Sound pressure level: 78 dB(A) Lp A. Did you know – Li-ion batteries: Have no memory effect. They consist of 3.6 V cells. When fully charged, they have a voltage higher than 3.6 V, i.e. 5 cells at 3.6 V = 18 V – but after a full charge, a peak voltage of up to 20 V is possible. Please note: to ensure a long battery life, store the battery at between 50 and 80 per cent charge. They have more than twice the energy density of, for example, nickel-cadmium batteries. They have a nominal voltage around three times that of nickel-metal hydride batteries. They require several full charge cycles to reach full capacity.