HAZET Cordless impact drill/driver 9530-11

Application: Drilling / hammer drilling. Powerful tool with additional side handle. Electronic Management System (EMS) protects the tool, extends its service life and increases efficiency. Anti-kickback shuts off the motor in the event of jamming and prevents the wrist from twisting. Turbo mode for faster and more powerful operation. Activating turbo mode achieves a speed increase of up to 27 per cent. Maximum torque of 158 Nm for drilling, hammer drilling and screwdriving, even in extreme applications. The selected torque setting is retained when switching from drilling to hammer drilling mode via direct switching. Brushless DC motor (BLDC): Longer service life, low wear, no need to replace carbon brushes. High efficiency and therefore lower battery consumption – a more compact motor enables smaller overall dimensions. Forward/reverse rotation with start-up lock. Electronic quick brake. Robust die-cast aluminium gearbox housing. Metal quick-action drill chuck with guide ring and Auto-Lock function. User protection even at maximum torque thanks to the extendable handle. Ergonomically designed, non-slip, rubberised grip. Integrated LED light with afterglow function. LED battery capacity indicator. Includes a mountable auxiliary handle, belt clip and bit holder. Supplied without battery or charger. Compatible with all 18-volt battery packs from the 9500 series. Sound pressure level LpA: 93 dB(A). Sound power level LWA: 104 dB(A). Uncertainty: K=3 dB(A). Vibration acceleration ah, D: 3.24 m/s². Uncertainty: K = 1.5 m/s². Battery voltage: 18 V. Battery capacity: 2.5 / 5 / 8 Ah. Maximum torque (hard): 158 Nm. (soft): 70 Nm. Torque adjustment: 23 settings. No-load speed, 1st gear/stage: 0 – 700 revolutions per minute. 2nd gear/stage: 0 – 2,500 revolutions per minute. No-load impact rate, 2nd gear: 0 – 4,000 revolutions per minute. Drill chuck capacity: 1.5 – 13 mm. Maximum drill bit diameter in wood: 89 mm. In steel: 13 mm. Weight (excluding battery): 1.7 kg. Dimensions: 182 mm x 75 mm x 210 mm. Did you know – Li-ion batteries: Have no memory effect. They consist of 3.6 V cells. When fully charged, they have a voltage higher than 3.6 V, i.e. 5 cells at 3.6 V = 18 V – but after a full charge, a peak voltage of up to 20 V is possible. Please note: to ensure a long battery life, store the battery at between 50 and 80 per cent charge. They have more than twice the energy density of, for example, nickel-cadmium batteries. They have a nominal voltage around three times that of nickel-metal hydride batteries. They require several full charge cycles to reach full capacity.