HAZET Cordless impact driver 9512-950

Patented vibration damping protects the wrist and the battery lock. 18-volt cordless impact driver. Basic unit without battery or charger. Auto-stop function stops the tool as soon as the impact mechanism engages or when the impact mechanism stops working during loosening: this prevents over-tightening or the loss of screws and nuts during operation. Prevents over-tightening of, for example, small screws thanks to three different speed settings (‘Speed Command’). Forward/reverse rotation with start lock. Electronic quick brake. LED battery capacity indicator on the battery pack. Compatible with all 18-volt battery packs in the 9500 series. Powerful hammer mechanism for maximum performance enables the loosening of seized fastenings, e.g. rusted screws, even in extreme applications. LED light with afterglow function. 3 tightening torque settings: Setting 1: 150 Nm, 0–1,000 revolutions per minute; Setting 2: 200 Nm, 0–2,000 revolutions per minute; Setting 3: 750 Nm, 0–2,450 revolutions per minute. No-load speed: Level 1: 0–500 revolutions per minute; Level 2: 0–1,000 revolutions per minute; Level 3: 0–2,100 revolutions per minute. Compact design. Die-cast aluminium tool head – impact-resistant and durable. Weight (excluding battery): 1.9 kg. Brushless DC motor (BLDC): longer service life, low wear, no need to replace carbon brushes. High efficiency and therefore lower battery consumption – a more compact motor enables smaller overall dimensions. Electronic Management System (EMS) protects the battery pack, extends service life and increases efficiency. Ergonomic, non-slip rubberised handle. Charging temperature: 4 to 40°C. Maximum storage temperature: 50°C. Maximum impact rate: 2,800 impacts per minute. Sound power level: 98 dB(A) Lp W. Vibration acceleration: 17.88 m/s². Drive: 1/2 inch (12.5 mm) square drive. Dimensions: 159 mm x 74 mm x 227 mm. Operating temperature range: –10°C – 40°C. Maximum torque [Nm]: 950 Nm. Sound pressure level: 87 dB(A) Lp A. Did you know – Li-ion batteries: Have no memory effect. They consist of 3.6 V cells. When fully charged, they have a voltage higher than 3.6 V; i.e. 5 cells at 3.6 V = 18 V – but after a full charge, a peak voltage of up to 20 V is possible. Please note: to ensure a long battery life, store the battery at between 50 and 80 per cent charge. They have more than twice the energy density of, for example, nickel-cadmium batteries. They have a nominal voltage around three times that of nickel-metal hydride batteries. They require several full charge cycles to reach full capacity.