HAZET replacement head 1952-050 50 mm
Brand: HAZET
Description Short: HAZET replacement head 1952-050 50 mm
Art.-no. 95032595
Manufacturer article no. 1952-050
EAN 4000896008452
Replacement heads ∙ Pair for plastic soft-face mallet HAZET 1952-50 Made of tough Desmopan® material Remove worn heads by turning them sharply to the left New heads are driven on by impact or pressure without turning Made In Germany Diameter: 50 mm Net weight (kg): 0.13 kg Disclaimer Incorrect or faulty spare parts or their incorrect installation can lead to damage, malfunctions or total failure of the tool. The use of non-approved spare parts or improper installation will invalidate all warranty, service, compensation and liability claims against the manufacturer or its agents, dealers and representatives.
Brand | HAZET |
EAN | 4000896008452 |
Manufacturer Part Number | 1952-050 |
Description Short | HAZET replacement head 1952-050 50 mm |
Gross Weight | 0.132 kg |
Last viewed
Straight screw-in connector PA 6 110955
WIDIA high-perf. SC end mill VariMill I D=10.0x38x89mm HB shaft BCH=0.5
ATORN test pin corrosion and acid resistant TC1 13.63 mm x 70 mm
HAZET 1/4 inch socket 4.5 mm DIN 3124
3M Scotch-Brite (TM) non-woven roll WR-RL 100 mm x 10 m A MED 7100182462
ATORN RockTec PRO HPC end mill, long, KR 10x30x35x80 mm T=4 HA r=0.2
ATORN solid carbide end mill T3 HA, 6.0 x 16 x 21 x 57 mm, plain
ORION blind hole magnet 1.6 mm diameter 65 mm long
ORION flat scraper carbide-tipped 250x25 mm cutting plate soldered
BIAX DRUCKLUFT TCD 0603 carbide bur, cut 5