KEMMER Indexable grooving insert A BTNN 4 GF110 TILOX N article number 20291
Brand: KEMMER
Surface: TILOX
Art.-no. 17676284
Manufacturer article no. 20291
Application
For parting at deep grooving depths
Execution
- BTN geometry with grooved cutting edge, reinforced flanks and generous, trough-shaped chip chamber.
Advantage
- Very good chip control in nearly all machining materials.
 | |
Brand | KEMMER |
Manufacturer Part Number | 20291 |
Minimum order quantity | 10 |
Plate seat size piercing | 40 |
f min./max. | 0,03-0,28 mm/r |
Recessing width (S) | 4 mm |
Radius | 0.2 mm |
Tolerance of plunge depth | +/- 0.1 mm |
Surface | TILOX |
Carbide type | GF110 |
Min./max. Vc in steel | 140-260 m/min |
Min./max. Vc in stainless steel | 130-200 m/min |
Min./max. Vc in cast iron | 100-280 m/min |
Harmonized System Code | 82090020 |
Gross Weight | 0.005 kg |
Last viewed
ATORN Triple-profile thread milling cutter MTSH12114C3411UN
KS TOOLS BRONZEplus socket 1/2 inch hexagonal 14 mm
META Plug-in rack CLIP galv. w.5 shelves basic shelf HxLxD 2500x1300x500mm
ORION Collet chuck, sealed, ER40 clamping diameter 20.0 mm
GO thread ring gauge M11x1 6h
NO-GO thread ring gauge M75x1.5 6h
KEMMER Indexable grooving insert ETNZG 3,002 GF110 HARDSPEED N article number 54196
TYROLIT Straight cutting disc 115x0.75x22.23 mm A60 PREMIUM stainless steel
KS TOOLS Hexagon socket angle pin wrench, short, 3 mm
RÖHM AGILIS segment clamping sleeves, minimum diameter 33.7, for size 2