KS TOOLS Wallbox Type 2 charging cable, 3-phase, max. 11 kW, 16 A, 400 V, with RFID, without meter

Charging station for wall or column mounting in accordance with IEC61851 for electric and hybrid vehicles with type 2 charging cable (IEC 62196-2) up to 11 kW charging power 16 A (three-phase) 400 V Mode 3 Type B residual current device (RCD) with overheating protection 5 metre cable length RFID access control Practical holder for Type 2 plug TÜV tested, CE and RoHS certified The efuturo Wallbox stands out thanks to its compact design as a space-saving charging station for electric and hybrid vehicles. The integrated LED display makes the Wallbox easy to use and provides information about the charging status or possible error messages at a glance. The Wallbox is protected by an RCD type B residual current device and thus meets the highest safety standards. The high-quality plastic housing is suitable for safe outdoor operation of the efuturo Wallbox. The ergonomically shaped Type 2 charging plug and the high-quality, durable cable with a 5-metre range connect the wallbox quickly and easily to your electric or hybrid vehicle. The integrated RFID card reader prevents unauthorised use of the wallbox. Simply hold the supplied RFID card up to the Wallbox. The charging process is only activated after this authentication, and the Wallbox begins communicating with the vehicle. If you are not using the Wallbox, you can store the Type 2 plug in the designated holder to prevent damage to the plug from being run over or similar. Turn your garage or customer car park into your own personal filling station for your electric and hybrid vehicles with the efuturo wallbox. The optionally available stand further enhances your wallbox. With the efuturo wallbox, it is possible to significantly reduce charging time. While the charging cycle for a Renault Zoe takes approx. 25 hours at a domestic socket (2.3 kW), it takes approx. 16 hours with a 3.7 kW wallbox and only 4.5 hours with an 11 kW wallbox. It is up to 10 times faster with a 22 kW wallbox, reducing the charging time to approx. 2.5 hours. It should be noted that our standard household sockets are not designed for the amounts of electricity required to charge electric and hybrid vehicles. Although it is possible to charge vehicles from sockets, this should only be considered a temporary solution. The simple design of the efuturo wallbox saves you from any nasty surprises when you receive your electrician's bill. The components used are very familiar to your electrician. The extremely expensive RCD type B residual current circuit breaker is already integrated into the efuturo Wallbox. This guarantees you the highest level of safety and means that the circuit breaker does not have to be additionally installed in an external switch cabinet by a specialist. Unfortunately, due to the very small size of the Wallbox housing, it is not possible to integrate an electricity meter into our efuturo Wallboxes with 11 kW or 22 kW. We offer an additional electricity meter for this purpose. This can be easily mounted by an electrician in the switch cabinet on a top-hat rail and connected in front of the wallbox. This MID-calibrated electricity meter allows you to read your electricity consumption. This enables you to monitor your electricity consumption. Landlords can use the MID-calibrated electricity meter to bill their tenants for the consumption of charging current.