MAKITA 40V 1/4-inch cordless impact driver, 220 Nm, 3,700 rpm, with 2 BL4025 batteries, TD002GD201

Robust tool thanks to the use of aluminium parts and rubber buffers. Users can choose from five different modes for precise work. Four tightening modes, as well as a T-mode – a special mode for tightening self-tapping screws. Includes LED work light and additional lighting mode. With double spring mechanism. New design in camouflage finish. Double spring mechanism: The hammer is driven by a double spring unit comprising two springs with different tension forces. One spring is used for lighter work, whilst the second spring engages for heavier tasks. This minimises kickback and reduces vibrations. Five operating modes. Tightening level 4: Max. impact rate 4,100 min⁻¹. For tightening with maximum force and speed. Example: Driving screws into sub-structure material, tightening long screws. Tightening Level 3: Max. impact rate 3,600 min⁻¹. For tightening with lower force and speed than in Max mode (easier to control). Example: Driving screws into subfloor material, tightening screws. Tightening level 2: Max. impact rate 2,600 min⁻¹. For tightening where a clean finish is required. Example: Driving screws into finished panels and plasterboard. Tightening level 1: Max. impact rate 1,400 min⁻¹. For tightening with less force to prevent the screw threads from stripping. Example: Tightening wing screws or small screws such as M6. T-mode: The tool drives a screw in at high speed and stops shortly after the impact cycle begins, thereby preventing the screw from being overtightened. Example: For driving self-tapping screws into a thin metal plate.. Switching the light mode on and off. To switch the light on, set the rotation direction selector lever to the neutral position and press the trigger switch. The light will remain on for approximately one hour. To switch the light mode off, press the trigger switch again.. XGT battery system; 1. Battery voltage; 40 V. Battery type; Li-ion. No-load speed; 0 – 1100 / 2100 / 3200 / 3700 min⁻¹. Max. torque; 20 / 50 / 170 / 220 Nm. Standard screws; M5 – M16. Machine screws; M4 – M8. High-strength screws; M5 – M14. (No-load) impact rate; 0 – 1400 / 2600 / 3600 / 4600 min⁻¹. Chuck; 1/4". Product weight; 2.9 kg. Sound power level (L_WA); 105 dB(A). Sound pressure level (L_pA); 97 dB(A). Noise K-value; 3 dB(A). Weight including battery; 1.7 – 2.9 kg. Product dimensions (L x W x H); 119 x 86 x 252 mm. Vibration values, tightening under maximum load; 12.9 m/s². Vibration uncertainty factor (K-value), tightening under maximum load; 1.5 m/s². Brushless motor; 1. 191B36-3; BL4025 battery; 2. 191E07-8; DC40RA quick charger; 1. 346317-0; Hanging bracket; 1. 821883-3; Plastic carrying case; 1 - Further information: EAN number: - 0088381767842 - Manufacturer’s item number: - TD002GD201