MELUTEC Factory calib. type KWR f. contour meas. inst. w/ factory calib. f. roughness
Brand: MELUTEC
Art.-no. 30004402
Manufacturer article no. K353-0201
Application
Calibration of contour measuring instrument or hybrid instruments with additional roughness measurement
Execution
- without contour and/or roughness standard
- Guideline: manufacturer’s specification, VDI/VDE 2629 Part 1 and Part 2 + DIN EN ISO 3274
Notes
The prices listed only apply to initial calibration of new products.
For recalibrations, please contact us at 07141 498-4848 or bestellung@hahn-kolb.de.
Brand | MELUTEC |
Manufacturer Part Number | K353-0201 |
Minimum order quantity | 1 |
Type of calibration | Factory calibration |
Area of application for calibration group (Bereich) | Contour measuring device X-axis up to 200 mm |
Calibration option | Option KWR Contour measuring device with factory calibration roughness |
Calibration certificate | Works calibration certificate |
Gross Weight | 0.010 kg |
Last viewed
RÖHM Spare key 0.5-13 mm
SCHULTE K3000 Cantilever stand double IPE140 2500x(2x)600 2675 kg/Page No. 27573
RIEGLER Foot mounting LB for short-stroke cylinders ACQ/ASQ 115868
ATORN Bit C6.3 TX 3 x 25 mm
VARIOFIT Sw-600.606 workshop trolley with one load area
KS TOOLS STAINLESS STEEL engineer's hammer with fibreglass handle, 500 g
ATORN End mill PM TiAlN D844B K HF, diameter 6.0 mm
KS TOOLS Brass plug nipple with external thread, G3/8 inch AG
ATORN Twist drill bit HSS type N DIN 1897 6.40 mm x 70 mm x 31 mm, 118°
KS TOOLS Exhaust clamp pliers, 310 mm