ORION HPC multi-tooth mill, diameter 8.0 x 8 x 22 x 70 mm, HA shaft
Brand: ORION
Surface: TiSiN
Length: 70 mm
Art.-no. 16931118
Manufacturer article no. 16931118
EAN 4053625351305
Application
Multi-tooth mill for circumferential machining, fine finishing and semi-roughing up to 68 HRC.
Execution
- solid carbide ultra-fine grain
- TiSiN-coated
- Unequal twist angle
- HA shaft in line with DIN 6535
- type H
- 0° chip angle
- cutting edge finish
- centre cutting
Advantage
- optimum chip removal and temperature resistance
- Maximum service life deu to TiSiN coating
Notes
At >60 HRC: ae = 0.07xD. Face cut from Z6 is only possible to a limited extent.
Brand | ORION |
EAN | 4053625351305 |
Manufacturer Part Number | 16931118 |
Cutting material | SC |
Surface | TiSiN |
Type | H |
Number of cutting edges (Z) | 6 PCS |
Twist angle | 45° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 8 mm |
Cutting edge length | 22 mm |
Length | 70 mm |
Shank diameter | 8 mm |
fz hard 65 HRC | 0.02 mm |
Product Group | 1FQ |
Gross Weight | 0.015 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 160-180 | 0.03 | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 160-180 | 0.03 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 150-170 | 0.03 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 150-170 | 0.03 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 155-175 | 0.03 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 135-155 | 0.03 | ⚫ | |
Last viewed
steel test pin, tolerance class 1, Ø 1.93 x 70 mm
BOSCH ProCORE 18 V 12.0 Ah battery pack, charging time 90 mins
ORION setting ring 35 mm, DIN 2250-1, shape C
BRUCKNER fixed centring point MK 2, carbide-tipped full point
SCANGRIP CONNECT-POWER power supply
ATORN thread profile inserts, metric 60° pitch 4.0-6.0 mm Americ. thr. 60°
GESIPA Li-ion quick charger for 14.4 V batteries
KNIPEX circlip pliers J1 140 mm for internal circlips
ATORN mini cutting insert AZR 5.0mm R0.5 L22 HC5615
ATORN solid carbide drill UNI TiAlNplus 3xD without IC 7.3 mm straight shank HA