ORION Tapping chuck HSK63 ER16 M3-M12 compensation +/-0.5 mm
Brand: ORION
Art.-no. 21557021
Manufacturer article no. 21557021
EAN 4053625562817
Application
For thread cutting on machine tools with synchronous spindles. With rigidly clamped screw taps, pitch errors cause high axial forces that can be compensated for by synchronous tapping chucks through minimal length compensation under pressure and tension.
Execution
- Length compensation under pressure and tension 0.5 mm.
Advantage
- Compensation of pitch errors under pressure.
- Increased tool service life.
Delivery
1x synchronous tapping chuck.
 | |
Brand | ORION |
EAN | 4053625562817 |
Manufacturer Part Number | 21557021 |
Minimum order quantity | 1 |
Tool holding device | HSK 63 |
Tool holding device type | Quick change tapping chuck |
Form | A |
Projecting length (A) | 89 mm |
Collar diameter | 34 mm |
Collet type | ER 16 |
Balancing quality | G 2.5 at 25,000 rpm |
Harmonized System Code | 84661020 |
Gross Weight | 1.400 kg |
Last viewed
KS TOOLS HSS TiN cone and deburring countersink 90 degrees, 5.3 mm
RIEGLER Flow valve 108430
KS TOOLS CHROMEplus combination wrench, angled, 12 mm on hanger
RIEGLER Storz blind coupling chain aluminium 108262
STAHLWILLE Sockets 40D 1/4 inch AF 11 mm L.23 mm 01030011
KS TOOLS Five-point star angle pin wrench, bore, long, TS20
MITUTOYO Snap gauge adjustable without dial gauge measuring range 50-75 mm
FEIN Needle roller bearing 31348013000
UVEX Heckel MACSOLE ADVENTURE 3.0 boot S3 67312 black yellow width 10 size 48
MITUTOYO Holder for micrometer heads 303570