ORION high-perf. drill bit SC TiNAlOX HPC 3xD 19.5 x 20 x 131 mm HB shank w. IC
Brand: ORION
Surface: TiNALOX
Length: 131 mm
DIN: 6537
Art.-no. 11184195
Manufacturer article no. 11184195
EAN 4039247793914
Brand | ORION |
Cutting edge diameter | 19.50 mm |
EAN | 4039247793914 |
Manufacturer Part Number | 11184195 |
Tolerance of cutting edge diameter | m7 |
Cutting material | SC |
Surface | TiNALOX |
Max. drilling depth (D) | 3xD |
Type | HPC UNI |
Coolant supply | Internal |
Tool holding device | HB parallel shank |
Angle of the tip | 140 Degree |
Shank diameter | 20 mm |
Chip flute length | 79 mm |
Length | 131 mm |
f steel 1000 | 0.33 mm/r |
DIN | 6537 |
Harmonized System Code | 82075050 |
Gross Weight | 0.432 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 140-175 | 0.35-0.4 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 120-145 | 0.35-0.4 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 110-140 | 0.35-0.4 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 110-130 | 0.35-0.4 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 70-110 | 0.32-0.36 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 90-145 | 0.32-0.36 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 50-60 | 0.24-0.28 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 110-125 | 0.32-0.36 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 90-120 | 0.32-0.36 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 60-80 | 0.17-0.25 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 50-60 | 0.24-0.28 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 250-310 | 0.37-0.4 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 200-260 | 0.37-0.4 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 80-90 | 0.32-0.35 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 100-125 | 0.32-0.35 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 180-220 | 0.32-0.35 | ⚪ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 280-325 | 0.32-0.35 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 40-100 | 0.26-0.35 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 40-80 | 0.26-0.35 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 40-70 | 0.26-0.35 | ||
| 3.10 Graphite | C8000 | <60 | 90-130 | 0.225-0.38 | ||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 160-210 | 0.35-0.4 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 130-140 | 0.35-0.4 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 120-130 | 0.35-0.4 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 40-45 | 0.15-0.23 | ⚫ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 30-40 | 0.15-0.23 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 22-40 | 0.15-0.23 | ⚪ |
Last viewed
ATLAS Ergo-Med® insoles high RED, size 45
ASW socket TX T30 with 3/8 inch drive, length 50 mm
ATORN thread cutting insert 08IL19W HC5630
FEIN HM Ultra 50 core drill with QuickIN MAX/ Weldon 32 diameter 78 mm
ORION cemented carbide indexable insert VNGG160408-MM1 OHC8515
EROGLU combination arbour BT40-27-100 JD/JF
ATORN thread cutting insert 16IR2.0MJ HC5625
ORION thread NO-GO ring gauge DIN 2299-1 M 2 ISO 6g
Pressure regulator DRV 225 high-pressure version non-returnable with pressure gauge 101444
ATORN thread cutting insert holder for LINEARREVOLVER SEL2020K16G