ORION profiling cutter for V-notch specimens, 75.0 x 0.8 x 27mm ISO/V HSSE5
Brand: ORION
Art.-no. 14345010
Manufacturer article no. 14345010
EAN 4039247082902
Execution
- In relief-ground precision version for ISO V-notch specimens (ISO/V) in accordance with DIN 50115
- Milling angle 45°
- V radius R 0.25 mm
Brand | ORION |
EAN | 4039247082902 |
Manufacturer Part Number | 14345010 |
Number of cutting edges (Z) | 18 PCS |
Cutting edge diameter | 75 mm |
Width | 8 mm |
Bore diameter | 27 mm |
fz steel 700 | 0.06 mm |
Product Group | 1HH |
Gross Weight | 0.200 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 40-45 | 0.05-0.07 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 40-45 | 0.05-0.07 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 32-36 | 0.04-0.06 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 32-36 | 0.04-0.06 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-25 | 0.04-0.05 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 35-45 | 0.05-0.06 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 18-20 | 0.03-0.04 | ⚪ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 20-25 | 0.02-0.03 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 14-16 | 0.03-0.04 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 14-16 | 0.03-0.04 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 20-28 | 0.03-0.06 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 180-350 | 0.05-0.08 | |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 80-90 | 0.04-0.06 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 30-40 | 0.07-0.08 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 40-50 | 0.06-0.08 | |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 40-45 | 0.07-0.08 | ⚪ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 45-55 | 0.06-0.08 | |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 120-150 | 0.05-0.07 | ||
| 3.08 Duroplast | Bakelit, Melamin | <150 | 80-90 | 0.06-0.08 | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 40-50 | 0.05-0.06 | ||
| 3.10 Graphite | C8000 | <60 | - | - | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 30-50 | 0.06-0.08 | ⚪ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 30-50 | 0.06-0.08 | ⚪ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 30-50 | 0.06-0.08 | ⚪ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 10-20 | 0.03-0.05 | |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 10-25 | 0.04-0.06 | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-20 | 0.03-0.04 | |
Last viewed
DAkkS calibration for micrometer up to 100 mm with setting standard up to 50 mm
Test pin, steel, tolerance class 1, dia. 3.86 x 70 mm
RHODIUS diamond cutting disc 300x12x2.8x22.23mm w/ reducing ring to 22.2 + 20mm
ATORN twist drill N HSS, steam-treated, DIN 338, 8.0 mm x 117 mm x 75 mm, 118°
AUTOSTAT spring balance type 7212/1 cable extension 2500mm carry. cap. 0.5–2.0kg
ORION cemented carbide gauge block tolerance class 1 12.00 mm
Brush set, 10 pcs: flat brushes, round brushes, enamel brushes
META double plug-in rack CLIP 230 galv. comp. add-on sh. 2000x1000x500mm 2x5 sh.
FEIN battery starter set, 18 V/6.0 Ah
FLEX WL 2800 18.0 cordless floodlight torch, 18 V, beam range 630 m, 1,000 Im