PFERD CBN mounted point cylinder diameter 4.0 mm carbide shank 3 mm B151 coarse
Brand: PFERD
Description Short: PFERD CBN mounted point cylinder diameter 4.0 mm carbide shank 3 mm B151 coarse
Art.-no. 95125281
Manufacturer article no. 36154515
EAN 4007220353714
CBN mounted point cyl. Ø 4.0 mm carbide shank Ø 3 mm B151 (coarse) for stationary internal grinding. Electroplated diamond and CBN mounted points are used for both wet and dry grinding. Straight pins with carbide shanks are used for stationary internal grinding. The carbide shank has a modulus of elasticity (modulus of elasticity) that is around three times higher than that of a steel shank. This describes how much a body deforms under the effect of a load. In terms of internal grinding, carbide shanks can achieve higher cutting performance, better surfaces and more precise shape and position tolerances. N = non-stepped shank
Brand | PFERD |
EAN | 4007220353714 |
Manufacturer Part Number | 36154515 |
Description Short | PFERD CBN mounted point cylinder diameter 4.0 mm carbide shank 3 mm B151 coarse |
Gross Weight | 0.007 kg |
Last viewed
UVEX 2 xenova(R) sandals S1 95537 black blue width 10 size 48 9553748
HAKRO men's Cotton Tec polo shirt, red, size 3XL
UVEX safety glove HexArmor PointGuard(R) Ultra 4045 60005 size 11 6000511
Test pin, steel, tolerance class 1, dia. 6.65 x 70 mm
WIHA fine screwdriver set PicoFinish slotted Phillips 7-piece 42991
KERN IOC 60K-2LM platform scales, weighing range 30/60 kg, gradation 10/20 g
ATORN thread cutting insert 16IR16W HW5615
MITUTOYO gauge block set, ceramic, 10 pcs, tol. class 0, with calibration cert.
STAHLWILLE ratchet wrench set FastRatch TCS WT 240 8-19mm 10-piece 96830130
Box workbench 1500 3-part housing model 258 BMP 50 mm 7035/5010 900x1500x700