PFERD HSS taper and deburring countersink 90 degrees diameter 4.3mm shank 4mm DIN 335C
Brand: PFERD
Description Short: PFERD HSS taper and deburring countersink 90 degrees diameter 4.3mm shank 4mm DIN 335C
Art.-no. 95123843
Manufacturer article no. 25202100
EAN 4007220164617
HSS countersink and deburrer 90° Ø 4.3 mm shank Ø 4 mm DIN 335 C. Countersinks from PFERD are characterized by their particularly sharp cutting edges, which achieve very good results even at low cutting speeds. High-performance countersinking tools with a countersinking angle of 90° for countersinking 90° screws for all common materials such as steel, cast steel and non-ferrous metals.
Brand | PFERD |
EAN | 4007220164617 |
Manufacturer Part Number | 25202100 |
Description Short | PFERD HSS taper and deburring countersink 90 degrees diameter 4.3mm shank 4mm DIN 335C |
Gross Weight | 0.013 kg |
Last viewed
Safety valve DN 8 104222
META MINI-RACK wide-span rack ht 3000 mm basic rack w/ chipboard 1,400x800 mm
FAHRION collet chuck DIN6343 173E 1.00 round, smooth
Pallet trolley 1200 x 800 x 650 mm, load capacity 800 kg, stopper, red
Drawer, 360 mm/100 mm, full ext., 100 kg, colour opt. for 800 B int.: 900x700 mm
ALBRECHT SBF-plus drill chuck 0.5-6.5 mm/MK 2
ELTEN women's safety low shoe IMPULSE Lady XXTL blue Low ESD S1P 742301-36
MITUTOYO lever gauge probe 40 mm, meas. range 1.5 mm, pitch 0.01 mm, basic set
DAkkS calibration for outside micrometers 25-100 mm
Small check valve, nickel-plated brass 103844