PFERD HSS taper and deburring countersink UGT 90 degrees diameter 16.5 mm shank 10 mm
Brand: PFERD
Description Short: PFERD HSS taper and deburring countersink UGT 90 degrees diameter 16.5 mm shank 10 mm
Art.-no. 95124138
Manufacturer article no. 25202173
EAN 4007220420492
HSS countersink and deburrer UGT 90° Ø 16.5 mm shank Ø 10 mm DIN 335 C with unequal pitch. Countersinks from PFERD are characterized by their particularly sharp cutting edges, which achieve very good results even at low cutting speeds. High-performance tools with a countersinking angle of 90° for countersinking 90° screws for all common materials such as steel, cast steel and non-ferrous metals. The countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes and thus enable optimum chip and heat removal, smooth running and optimum work results.
Brand | PFERD |
EAN | 4007220420492 |
Manufacturer Part Number | 25202173 |
Description Short | PFERD HSS taper and deburring countersink UGT 90 degrees diameter 16.5 mm shank 10 mm |
Gross Weight | 0.047 kg |
Last viewed
LEITECH thread test arbour, M 7 x 0.75 - 6H, with digital readout 0.01 mm
PFERD collet group 6 SPZ 950.325.03 3 mm
STAHLWILLE Screwdriver bit insert 54TXB 1/2 inch T27 L.55 mm 03110027
ATORN thread cutting insert 16VEL2.5ISO HW5615
ATORN indexable insert countersink, T2 CC..09 30.0 mm HB
KLW pair of protective jaws made of polyurethane corrugated for jaw width 140 mm
ACTION Power socket SLD 1/2 inch SW 17 mm DO60925017
ATORN SC miniature ball nose end mill diameter 1.5x2x20x55 mm T2 HA 3 ULTRA DC
SATA air piston rod for SATA UBE 65979