PFERD HSS taper and deburring countersink UGT 90 degrees diameter 6.3 mm shank 5 mm
Brand: PFERD
Description Short: PFERD HSS taper and deburring countersink UGT 90 degrees diameter 6.3 mm shank 5 mm
Art.-no. 95124102
Manufacturer article no. 25202168
EAN 4007220420447
HSS countersink and deburrer UGT 90° Ø 6.3 mm shank Ø 5 mm DIN 335 C with unequal pitch. Countersinks from PFERD are characterized by their particularly sharp cutting edges, which achieve very good results even at low cutting speeds. High-performance tools with a countersinking angle of 90° for countersinking 90° screws for all common materials such as steel, cast steel and non-ferrous metals. The countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes and thus enable optimum chip and heat removal, smooth running and optimum work results.
Brand | PFERD |
EAN | 4007220420447 |
Manufacturer Part Number | 25202168 |
Description Short | PFERD HSS taper and deburring countersink UGT 90 degrees diameter 6.3 mm shank 5 mm |
Gross Weight | 0.017 kg |
Last viewed
ATORN micro drill bit, SC HPC 1.9 mm x 3 mm x 38 mm HA
ORION slotting cutter HSSE8 DIN 327D short 11.7 mm shank DIN 1835B
C+P Classic PLUS locker cabinet, 4 comp. 1,850x400x500 mm RAL 7035/7016
LOWA safety low shoe LARROX Work GTX black Lo S3 CI 5420-47 Size 47
PFERD X-LOCK wheel brush, diameter 125 mm, twist-knotted steel wire 0.50 mm
KIENINGER solid carbide die-sinking cutter GWR 20.0 x 50 x 140 mm int. cooling
LISTA Rear panel 45E (WxH) 817x2500 mm R7035
SATA seal holder for LP90 nozzle head spray mix and LP90 76448
Straight screw-in fitting PP 110854