PFERD HSSE Co5 taper and deburring countersink 90 degrees diameter 25 mm shank 25 mm
Brand: PFERD
Description Short: PFERD HSSE Co5 taper and deburring countersink 90 degrees diameter 25 mm shank 25 mm
Art.-no. 95124213
Manufacturer article no. 25202188
EAN 4007220420645
HSSE Co5 countersink 90° Ø 25 mm shank Ø 25 mm DIN 335 C with unequal pitch. Countersinks from PFERD are characterized by their particularly sharp cutting edges, which achieve very good results even at low cutting speeds. High-performance tools with a countersinking angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). The countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes and thus enable optimum chip and heat removal, smooth running and optimum work results. Long tool life and temperature-resistant design due to Co content.
Brand | PFERD |
EAN | 4007220420645 |
Manufacturer Part Number | 25202188 |
Description Short | PFERD HSSE Co5 taper and deburring countersink 90 degrees diameter 25 mm shank 25 mm |
Gross Weight | 0.079 kg |
Last viewed
Wall bracket including 2 screws and O-ring for FUTURA 100039
ATORN screw tap HSSE V3 vaporised B 0° thread 1/8 D 3xD CNC UNI
ATORN indexable insert WNMG 060408-FP1 ACP25T-1
BOSCH Extension 1/4-inch hexagonal shank Self Cut Speed 152mm 2608595422
FEIN Magnetic vice incl. core drill set MK3 90701007000
individual test pin from gauge steel, available in Ø 12.00-13.99 mm
L-plug-in fitting Blue series self-locking 151466
ATORN solid carbide drill UNI TiAlNplus 12xD with IC 7.5 mm
