RAU Computer cabinet 67T with monitor housing 100x520x1895 mm mobile keyboard drawer

Monitor housing (W650 x D250 x H710 mm) with lockable monitor compartment (inside W635 x D230 x H530 mm, integrated ventilation grid) suitable for screens up to max. 26". There is an open storage compartment under the monitor compartment (compartment height 140 mm). Perforated panel rear wall next to the monitor housing with 4-edge system perforation (perforation 10x10 mm, distance between hole center and hole center 38 mm) for holding perforated panel accessories, in front of it writing top with hinged lid (front with stop bar) and pen tray. Support height 400 mm. Basic cupboard divided into separately usable and operable keyboard and hinged door compartment, including castor set. Castor set with 4 swivel castors, 2 with brakes (castor diameter 100 mm, overall height 120 mm, tread made of thermoplastic rubber (gray, non-marking, 85 degree Shore), wheel body made of polypropylene). Fastening with triangular threaded plates. Cable apertures at the rear of the enclosure, in the lid and in the inner section. Keyboard compartment (height 120 mm) with front flap (lockable) and keyboard drawer. Keyboard drawer W1020 x D450 mm for keyboard and mouse support (80 % extension, load capacity 20 kg, latching point). Hinged door compartment (height 850 mm) with double hinged door (opening width approx. 100 degrees, lockable), center support for dividing the installation width into 1xW650 mm (left) and 1xW450 mm (right) and with the following interior partitioning (installation height adjustable): left: 1 x pull-out shelf W650 x D450 mm (pull-out 80%, load capacity 20 kg, latching point). right: 1 x pull-out shelf W450 x D450 mm (pull-out 80%, load capacity 20 kg, latching point).