RAU Group workbench 2700x2340x840mm 6x1drawer partial extension Series 401

Solid beech worktop, 40 mm thick.6-corner worktop (2-part, including worktop/panel connector and fittings), edge length 1350 mm, corner dimensions 2700x2340 mm. Beech frame with finger-joint gluing. Front edge with radius. Surface protection with environmentally friendly lacquer oil. The classic among worktops: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100% from our own production (from the tree to the worktop) with raw material from sustainable and regional forestry.System substructure, H800 mm.12-leg frame with six pairs of C-profile steel legs (70x50x2 mm) incl. depth bracing (top and bottom). Frame legs at the top with wide support surface (120 mm) and at the bottom with integrated height adjustment/height adjustment using C-profile steel with perforated grid (25 mm) and floor anchoring option using perforated foot plates.6 underbench drawers, W520 x D650 x H175 mm, each flush on the right at the edge of the top with the following division:1 x drawer size L 1xH150 mm.Drawer size L (inside W490 x D560 mm, load capacity 50 kg). Roller bearing mounted pull-outs (pull-out 90 %). The usable height of the drawer corresponds to the front height minus 15 mm. Drawer tray completely closed for optimum storage of drawer divider sets.Full-length ErgoScript® handle strip: sheet steel base with aluminum-colored overlay and integrated transparent cover (incl. labeling strips).Central locking (pin cylinder lock with 2 keys).