RAU Jerry worktable, height-adjustable 1000x800x800-850 mm stainless steel plating

Worktop with stainless steel sheet covering, thickness 25 mm. Top side with a 1.5 mm thick stainless steel coating (NIROSTA®), L-shaped edge at the front edge. Stainless steel to X5CrNi18-10, material number 1.4301 in accordance with DIN EN 17441/10088-2. Splash-proof, dirt-resistant, temperature-resistant, pressure-resistant. Largely resistant to acids, oils, greases, solvents and chemicals. Covering flame-retardant (B1) in accordance with DIN 4102. panel core MDF (medium density fiberboard). System substructure, W840 x D660 x H780-830 mm. 4-leg frame with two pairs of frame legs made of profile steel tube (30x30x2 mm) including depth bracing (top and bottom). Frame legs at the bottom with end element including height adjustment. Cross struts made of profile steel tube (50x25x2 mm) at the top under the worktop (front and rear). Stiffening beams at the rear (left and right) as a connection between the pair of frame legs and the rear cross strut. The frame legs are prepared for mounting/retrofitting a castor set. Note: This basic table can be supplemented with an extension table of the same depth.